Installation guide

IES-1880
16 FE + 2 GE Managed Switch -40 to 75C, DIN-rail
Quick Installation Guide
Default Setting
IP
192.168.10.1
Login root
Password [blank]
Console
115200, n, 8, 1
v1.00 - 1206
IES-1880 Page 1
Overview
LevelOne IES-1880 Industry Ethernet Switch provides 16 ports of
10/100Base-TX plus 2 ports of 1000Base Gigabit Ethernet to enable
high speed network at mission-critical environment. This device is
designed to be mounted on an industry standard DIN-rail, plus the
clearly visible status LEDs provide simple monitoring of port link
activity.
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including Electric
& Utility, Critical Infrastructure, Transportation and Surveillance
Security. This device operates under -40 to 75 Celsius (-40 to 167
Fahrenheit) temperature.
Resilient Ring Network
Supports Ring topology network providing simple installation and
ultra fast network recovery performance, less than 15ms. Unlike
much complex resilient topology, such as a redundant star, the Ring
simplifies the network design and requires less cabling installation.
In addition, fast network recovery time helps minimize system
downtime.
Oil & Gas Hazardous Application
Comply with Class 1, Division 2 certified, UL 1604 standard (UL
ISA12.12.01) is a higher level certification to assure that products
can be safely operated where specific potentially flammable or
explosive materials may be present.
IES-1880 Page 2
Features
 Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and
vibration for traffic control equipment.
 Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial
environment.
 Manageable via SNMP, Web-based, Telnet, and RS-232 console port.
 Supports Command Line Interface in RS-232 console.
 Support 802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation: 10/100/1000Mbps,
full/half-duplex; Auto MDI/MDIX.
 100Base-FX: Multi/Single mode SC or ST type. 100Base-BX: WDM Single mode SC type.
 1000Base-SX/LX: Multi mode or Single mode SC type. 1000Base-BX: WDM Single mode
SC type.
 Support 8192 MAC addresses. Provides 2M bits memory buffer.
 Alarms for power and port link failure by relay output.
 Power Supply: Redundant DC Terminal Block power inputs or 12VDC DC JACK with
100-240VAC external power supply.
 Field Wiring Terminal: Use Copper Conductors Only, 60/75℃, 12-24 AWG torque value
7 lb-in.
 Operating voltage and Max. current consumption: 1.25A @ 12VDC, 0.625A @ 24VDC,
0.313A @ 48VDC. Power consumption: 15W Max.
 -40℃ to 75℃ (-40℉ to 167℉) operating temperature range. Tested for functional
operation @ -40℃ to 85℃ (-40℉ to 185℉). UL508 Industrial Control Equipment
certified Maximum Surrounding Air Temperature @ 75℃ (167℉).
 For use in Pollution Degree 2 Environment.
 Supports Din-Rail or Panel Mounting installation.
 Suitable for use in Class I, Division 2, Groups A, B, C and D hazardous locations, or non-
hazardous locations only.
 Sealed Relay Device information: Sealed Device: Relay Type V23079-A2008-B301,
manufactured by Tyco Electronics Logistics Ag.
o Relay Cover: Manufacture of Plastic Material – Ticona. Designation of Plastic
Material – Vectra A130.
o Relay Epoxy: Manufacture of Material – Guangzhou Wells Chemical Co. Ltd.
Designation of Material – Type 6060RP. Generic Name of Plastic Material –
Epoxy Resin.
Package Contents
 IES-1880
 Quick Installation Guide
 CD User Manual
IES-1880 Page 3
LED Status
LED
Status
Description
PW 1,2,3
Steady
Power On
Off
Power Off
10/100Base
-
TX
, 100Base
-
FX
LNK/ACT
Steady
Network connection is established
Flashing
Transmitting or Receiving data
10/100
Steady
Connection speed at 100Mbps
Off
Connection speed at 10Mbps
10/100/1000Base
-
TX (Green)
1000Base-SX/LX (Orange)
LNK/ACT
Steady
Network connection is established
Flashing
Transmitting or Receiving data