LevelOne User Manual KVM-0213 2-Port PS/2 Cable KVM Switch Ver. 1.0.
English Package Contents 1. KVM-0213 2. User Manual 3.
Installation Important 1. Before you begin, make sure that the power to all the devices you will be connecting has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the switch will receive power from the computer. 2. To prevent damage to your equipment, make sure that all the devices you will be connecting are properly grounded. Installing your new KVM-0213 involves the following steps: 1.
Scan Interval Table n Sec. 1 3 Sec. 2 5 Sec. (Default) 3 10 Sec. 4 20 Sec. Troubleshooting Symptom Keyboard Not Responding Possible Cause Keyboard needs to be reset. Action Unplug the keyboard from the Console Keyboard Port, then plug it back in. Switch needs to be reset. Turn off the computers. Unplug the KVM cables. Wait five seconds; then plug the cables back in and turn the computers on. Pressing Hot Keys Gets No Hotkey sequence input Resend the Hotkey Response incorrectly.
Specifications Function Computer Connections Port Selection Console Ports Connectors KVM Ports Keyboard Video Mouse Speaker KVM-0213 2 Hotkey 1 x 6-pin Mini-DIN Female (Purple) 1 x HDB-15 Female (Blue) 1 x 6-pin Mini-DIN Female (Green) 1 x Mini Stereo Jack Female (Green) Keyboard 2 x 6-pin Mini-DIN Male (Purple) Video 2 x HDB-15 Male (Blue) Mouse 2 x 6-pin Mini-DIN Male (Green) Speaker LEDs Selected Cable Computers Length Emulation Keyboard/ Mouse Video Scan Interval Operating Temp.
