Manual

LevelOne
21
plus 8 more computers directly connect to the Master (to "PC A"~”PC
H”), see figure 13.
Figure 13: All 16-port KVM Switches in cascade
For OSD menu:
After connection completes, you should re-activate
the OSD menu to check if the Master recognizes the
Slaves. A triangle mark (!) is placed to the right
of the channel name indicating the port is connected
to a Slave not a computer. A number to the left of
the triangle mark indicates the Slave model, i.e. 8!
for an 8-port Switch.
Change Configuration while Running
A device (a computer or a KVM Switch) at any 'PC x' port can be
changed at any time after initial power-up. If you change any one of
the “PC 1” to “PC 8” ports connection from a computer to a Slave
KVM switch or vice versa, or replace the devices of a port; the OSD
LevelOne
22
will update this change the next time it is activated.
Note: Any new device must be turned off before it is connected to the
Master.