Installation guide

Network Video Recorder Administrator’s Manual
23
Network Connection Architecture
When connecting NVR with your network, please make sure you plug the network cable into
the right port.
NVR-12XX
LAN 1 Port
LAN 1 port is the default camera port for a typical local network. Via this port, the DHCP
server built in NVR automatically assigns IP addresses to network cameras once they are
connected. With this feature, you do not have to bother arranging the camera IP addresses
on your own. By default, this DHCP server is enabled, so please avoid connecting NVR to a
network where exits another DHCP server via this port.
LAN 1 Port (Camera Port)
Default: 192.168.0.10
LAN 2 Port (WAN Port)
Default: Dynamic /192.168.1.10