LevelOne User Manual USB-0301 USB Fast Ethernet Adapter Ver. 1.
ABOUT THIS MANUAL This manual provides a beginner's introduction to installing, configuring and using the USB2.0 Ethernet Adapter . Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice.
Table of Contents 1. Introduction ....................................................................................................... 3 Features ............................................................................................................................. 3 System Requirements ........................................................................................................ 4 Package Contents ...........................................................................................
1. Introduction 1. Introduction The USB2.0 Ethernet adapter design with small form factor, and simple plug-and-play Fast Ethernet network connection capability ,It is the easiest solution to enable your computer with network capability through an available USB 2.0 port without going through the hassles to install a network card. for desktops, notebook PC’s, Ultra-Mobile PC’s, docking stations ,digital-home appliances, and any embedded system using a standard USB port. The USB2.
USB 2.0 Ethernet Adapter User’s Manual System Requirements One available USB port Windows XP, Windows 7, Windows 8; Mac OS X 10.5 and later Package Contents Before installation, please check the items of the package. The package should contain the following items: USB 2.0 Ethernet Adapter x1 CD with Driver x1 Quick Installation Guide x1 LED Status LED Color Description Status Green Blinking: LAN activity. , when there is data flow between LAN and the host computer.
2. Installation 2. Installation Driver installation On Windows Operating Systems Caution: DO NOT connect the Ethernet Adapter to your computer before you install the provided driver. 1. Insert the provided Driver CD into your disc drive. Please locate and double-click the [setup.exe] file under [x:\ ]where x is your disc drive letter. Notice : It will encounter a User Account Control dialog box when attempting to install a program, please click Yes to start the installation.
USB 2.0 Ethernet Adapter User’s Manual 2. Click on [Install] to execute this installation. 3. When the installation is done, click[ Finish]. *Notice: You may need to restart system after finishing the installation.
2. Installation On Mac Operating Systems 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of [\Driver\Mac] 2. Click the [AX88772.dmg], the following [DISK IMAGE] virtual disk will be appeared on the Desktop of your Mac OSX system. (This “DISK IMAGE” virtual disk will be auto-removed after rebooting Mac OSX system.) 3. Click the [AX88772_v3.5.0.pkg], the following driver setup dialog will appear.
USB 2.0 Ethernet Adapter User’s Manual 4. Click the [Install] button to continue the installation operation. 5. Click the [Continue Installation] button to continue the installation operation. 6. Click the [Restart] button to restart Mac OSX system to take effect the revised driver installation. Now the installation is complete.
2. Installation Hardware installation 1. Connect the Ethernet adapters USB end to a free USB port of your computer. Then a pop-up message will appear in the notification area indicating the installation is complete. * Actual strings depend on your operation system. These screen shots are from Windows 7 and might vary slightly for each operation system. 2. Connect an Ethernet cable to the Ethernet port on the adapter. 3.
USB 2.0 Ethernet Adapter User’s Manual on Mac Operating Systems After booting up your Mac OPERATING SYSTEMSX system, plug USB dongle onto the USB port of your Mac OPERATING SYSTEMSX system and refer to below figure to add a new “USB Ethernet” network interface and then press the [Apply] button to take effect the new network interface.. Also navigate to System Preference>Network, please click on Renew DHCP Lease and Apply Now as following to verify the installation of driver and Ethernet Adapter.
3. Uninstalling the Driver 3. Uninstalling the Driver Uninstalling the Driver on Windows Operating Systems Please take these steps to uninstall Driver: 1. Open the Control Panel, Programs and Features and double-click Uninstall a Program on Vista/ 7 or Add or Remove Programs on XP. 2. Select [AX88772B] and click Uninstall or Remote 3. The uninstall process automatically. 4. Select Yes and click Finish to restart your computer to complete uninstall process. 5.
USB 2.0 Ethernet Adapter User’s Manual on Mac Operating Systems 1. .Click the “AX88772.dmg”, the following “DISK IMAGE” virtual disk will be appeared on the Desktop of your Mac OSX system. (This “DISK IMAGE” virtual disk will be auto-removed after rebooting Mac OSX system.) 2. Click the “AX88772_772A_772B_760_uninstall” script file to uninstall ASIX’s AX88772B/772A/760/772 Mac OSX driver. Situation 1: If the AX88772B USB dongle was installed, you will see below messages.
4. Specifications 4. Specifications General Host Interface USB 2.0 (1.1 compliant) Operating System Support Windows XP, Windows 7, Windows 8 Mac OS10.5 and later. Ports and Connectors Upstream 1 x Upstream USB Standard Type A plug Ethernet 1 x Ethernet Port (RJ-45 connector) LED Link LED (Amber) Status LED (Green) On: When connection to a 100Mbps network Off: When connection to a 10Mbps network On/Blinking: LAN activity. Off: No network traffic.
USB 2.0 Ethernet Adapter User’s Manual Relative Humidity < 85% non-condensing Regulatory Compliances Safety, EMI FCC, CE RoHS RoHS compliant * Specification is subject to change without further notice.
5. Regulatory Compliance 5. Regulatory Compliance FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
