User manual

32
3.2.3 Network > Routing
Routing refers to selecting paths in a network along which to send data. Figure 5.3.1
illustrates the route configuration page.
Figure 5.3.1: Routing configuration page
Route contains the following parameters:
 Routes List: Display list of routes.
 “Add” button to add new entry to the routes.
 “Edit” button to edit current selection.
 “Delete” button to delete current selection.
Figure 5.3.2 illustrates the add or edit page for route entry.
Figure 5.3.2: Routing – add or edit page
Routes – add page contain the following parameter:
 Subnet: Enter the IP address of destination subnet.
 Netmask: Enter the IP address of destination subnet network mask.
 Direct: Click on “Direct” drop down menu to select “Direct” or “Indirect”
route.
 Device: Click on “Device” drop down menu to select device. For example,
MESH, VLAN0, VLAN1……