User manual

51
 Device: Click on “Device” drop down menu to select device. For example,
WAN, MESH, VLAN0……
 Using: Click on “Using” drop down menu to select “Device” or “Network”.
 Comments: Enter comments for this entry.
 Active: Click on “Active” drop down menu to enable or disable this entry.
 Click on the Save Changes button to store and changes and then reboot the
device in order for the changes to take effect.
3.6.3 System Management > SysLog Server
This device can automatically send system logs to a SysLog server. On this page you
may configure the SysLog notice and server IP address. Figure 9.3.1 illustrates the
Syslog server configuration page.
Figure 9.3.1: SysLog Server configuration page
 Active: Choose to enable or disable this feature.
 Klog: Choose to enable or disable this feature.
 Level: Select a logging level from the drop-down list.
 Remote Syslog: Choose enable to remotely control the syslog feature.
 Remote Server Address: Specify the IP address of the remote syslog server.
 Click on the Save Changes button to store and changes and then reboot the
device in order for the changes to take effect.
3.6.4 System Management > Firmware
Click on the Firmware link in the navigation menu. This page allows you to upgrade
the firmware of the device in order to improve the functionality and performance.