Datasheet

WAP-3000
Wireless Access Point
one world_one brand_one level_
For more information, please contact your LevelOne representative, or visit www.level1.com
All technical specifications are subject to change without notice.
All mentioned brand names are registered trademarks and property of their owners
www.level1.com
Digital Data Communications GmbH.
Zeche-Norm St. 25, 44319, Dortmund, Germany
All mentioned brand names are registered trademarks and property of their owners.
Technical specifications are subject to change without notice.
© 2008 All Rights Reserved
www.level1.com
H/W Ver.1.x
11g Wireless Access Point
Product Overview
The LevelOne WAP-3000 11g Wireless Access Point acts as a bridge between
wired Ethernet and Wireless 11b/g networks for wireless clients to access
available wired and wireless networks.
Multiple Operation Modes
The WAP-3000 supports AP, AP Client, WDS bridging and Repeater wireless
operation modes for flexible deployment and use within a standard Local Area
Network.
For standard operations, the WAP-3000 connects to a LAN, broadband ADSL
router or network switch and provides instant network access to connected
wireless clients.
With WDS+AP mode the WAP-3000 is able to act as a bridge between two or
more networks, combining them into a single network to provide wireless users
with access to both networks.
In Repeater mode, the WAP-3000 extends the wireless area network to different
locations.
Robust Wireless Security
The WAP-3000 provides 64/128-bit WEP encryption as well as WPA, WPA2
secured connectivity for securing the Wireless Area Network and to prevent
unauthorized access.
Extended Wireless Coverage
The WAP-3000 Wireless Access Point is compliant with the IEEE 802.11b (11Mbps)
and IEEE 802.11g (54Mbps) standards and features a high-quality radio chip
that is able to provide directional area coverage for up to 50 meters indoors
and 100 meters outdoors.
Plug-and-Play Expansion of Home/Office Network
The LevelOne WAP-3000 Wireless AP is an easy to install “plug-and-play” access
point with an easy to use Web-based user interface. The WAP-3000 requires little
set-up and configuration and features an LED display for quick monitoring of
network errors and activity.
WAP-3000
Key Features
• IEEE 802.11b/g compliant Wireless Access
Point suitable for extending an existing LAN
• Features a 1-port Fast Ethernet interface
• Provides a wide area coverage range
• Features WPA, WPA2, 64/128-bit WEP
encryption for a secured wireless network
• Supports multiple wireless operation modes
• Full LED display panel for error detection
and network monitoring
• Compact design for desktop or wall-
mounting
• Plug-and-Play enabled for easy setup and
configuration
• Web-based configuration interface