Instruction Manual

4.3.1.4 DHCP Server
You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or
enable the router’s DHCP relay functions. The DHCP protocol allows your router to
dynamically assign IP addresses to PCs on your network if they are configured to obtain IP
addresses automatically.
To disable the router’s DHCP Server, check Disabled and click Next then click Apply.
When the DHCP Server is disabled you need to manually assign a fixed IP address to each
PC on your network, and set the default gateway for each PC to the IP address of the router
(the default is 192.168.1.254).
To configure the router’s DHCP Server, check DHCP Server and click Next. You can then
configure parameters of the DHCP Server including the IP pool (starting IP address and
ending IP address to be allocated to PCs on your network), lease time for each assigned IP
address (the period of time the IP address assigned will be valid), DNS IP address and the
gateway IP address. These details are sent to the DHCP client (i.e. your PC) when it
requests an IP address from the DHCP server. Click Apply to enable this function. If you
check “Use Router as a DNS Server”, the ADSL Router performs the domain name lookup,
37