Installation guide

Rear Ports
8
7 6 5 4 1 2
3
Port Description
1
Power
Switch
Power ON/OFF switch.
2 PWR
Connect the supplied power adapter to this jack.
3 RESET
After the router is powered on, press this recessed button using
the end of paper clip or other small pointed object to reset the
router or to restore it to factory default settings.
1. Recovery procedures for non-working routers (e.g. after a
failed firmware upgrade flash):
2. Recovery procedures for a lost web interface password:
4
LAN
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
5
Phone
Connect RJ-11 cable to this port when connecting to an analog phone
set.
6 LINE
Connect RJ-11 cable to this port when connecting to the telephone
wall jack
7 ADSL
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
8
Antenna
Connect the detachable antenna to this port.
3