User manual

WAN

Here you can manually enter the ADSL settings provided by your Service Provider.

Use this if the Easy Sign On, or Quick Start cannot successfully auto-detect your ADSL

settings.

 Main Port: To switch between ADSL and EWAN for WAN port function.

 VPI/VCI: Enter the VPI and VCI information provided by your ISP.

 Username: Enter the username provided by your ISP. You can input up to 128

alphanumeric characters (case sensitive). This is in the format of “username@ispname”

instead of simply “username”.

 Password: Enter the password provided by your ISP. You can input up to 128

alphanumeric characters (case sensitive)

 Service Name: This item is for identification purposes. If it is required, your ISP provides

you the information. Maximum input is 15 alphanumeric characters.

 Encap. method: Select the encapsulation format, the default is LLC. Select the one

provided by your ISP

 Auth. Protocol: Default is Auto. Your ISP advises on using Chap or Pap.

 IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP

address from your ISP.

Note: EWAN function turns LAN 1 into a WAN port. It supports DHCP, PPPoE or Static IP.