User manual

56
Set Wireless Configuration
 WLAN Service: Default setting is set to Enable.
 ESSID: The ESSID is the unique name of a wireless access point (AP) to be
distinguished from another. For security purpose, change to a unique ID name to the
AP which is already built-in to the router‟s wireless interface. It is case sensitive and
must not excess 32 characters. Make sure your wireless clients have exactly the
ESSID as the device, in order to get connected to your network.
 Channel ID: Select the ID channel that you would like to use. (Recommend Auto)
 Security Mode: You can disable or enable with WPA or WEP for protecting wireless
network. The default mode of wireless security is Disable.