User manual

60
Wireless
 WLAN Service: Choose to Enable or Disable the Wireless Network. Default setting is
set to Enable.
 Mode: The default setting is 802.11g+n (Mixed mode). If you do not know or have both
11g and 11n devices in your network, then keep the default in mixed mode. From the
drop-down manual, you can select 802.11g if you have only 11g card. If you have only
11b card, then select 802.11b. If you have only 11n card, then select 802.11n.
 ESSID: The ESSID is the unique name of a wireless access point (AP) to be
distinguished from another. For security propose, change to a unique ID name to the
AP which is already built-in to the router‟s wireless interface. It is case sensitive and
must not excess 32 characters. Make sure your wireless clients have exactly the
ESSID as the device, in order to get connected to your network.
Note: ESSID is case sensitive and must not excess 32 characters.