User manual

109
Privilege IP
Privilege IP/IPv6 Address List
If there are workstations inside the managed network that need to access the network without authentication, enter
the IP addresses of these workstations in the “Granted Access by IP Address”. The “Remark” field is not
necessary but is useful to keep track. Controller allows 100 privilege IP addresses at most. These settings will
become effective immediately after clicking Apply.
In addition to granting privileges to just IP addresses, administrator could also specify IP and MAC address sets in
this Privilege IP Address List. It is more secure to specify both the IP and MAC address of a privileged client that
requires no authentication.
Please note, the bandwidth of a client in the Privilege IP Address List will be bounded by the bandwidth limit in the
configured QoS Profile. However, the bandwidth of a client in the Privilege MAC Address List will not be bounded at
all.
Permitting specific IP addresses to have network access rights without going through standard
authentication process under service zone may cause security problems.