User manual

132
 Discovery Results: The newly discovered APs will be listed here. When the system’s Service Zone is set to
Tag-based mode, service zones also can be assigned here. After clicking Add, the current management page is
directed to AP List, where the newly added APs will show up in the AP List with a status of “configuring”. It may
take a couple of minutes to see that the status of the newly added AP change from “configuring” to “online” or
“offline”.
 AP Type: The model type of the discovered APs.
 IP Address: IP address of the specified AP.
 MAC Address: MAC address of the specific AP.
 AP Name: Mnemonic name of the specific AP, configurable.
 Admin Password: Password required for this AP, configurable.
 Template: Administrator can select a template profile which will be applied to the added AP.
 Channel: The selected channel will be applied to the added AP.
 Service Zone: The item is only available for selecting service zone when Tag-Based mode is selected.
 Add: The administrator can click Add button to register the APs to the List for management.
Input the desired name and password for the AP. Select one template, preferred channel, check the Add
checkbox and then click Add button to add it under the managed list.
When the AP is added, it will show up in the list below and be given a new IP address (depending on which
Service Zone it belongs to e.g.: 192.168.10.1).