User manual

148
9.12. AP Load Balancing
Configure AP Load Balancing; go to: Access Points >> Enter Local Area AP Management >> AP Load
Balancing.
It is a function to prevent managed APs from overloading. When the system detects the occurrence of APs'
associated-client numbers exceeding a predefined threshold at circumstances other APs in the same group are still
below the threshold, the balancing function will be activated to decrease the overloading APs' transmit power and
increase other available APs' transmit power; this will let other available APs have more chance to be associated.
The system can divide the managed APs into groups; define the group threshold, and a time interval which will
trigger the AP load balancing.
AP Load Balancing Page
Editing General Configuration Page
Editing Group Configuration Page