User manual

48
o IPv6 Settings: The IPv6 Address and configuration of this service zone (When IPv6 enabled).
o Network Alias List: Administrator may optionally set many alias network segments for a service
zone. This feature can allow a single service zone to be seen as many service zones, also hide the
IP address of a Service Zone’s network interface and to some degree, provide protection from
possible attacks from LAN clients.
 Click the Configure button to enter the Network Alias List page.
 Fill in the desired alias IP address and select the preferred Subnet Mask, Operation mode,
check the Enable box and click Apply button to activate the settings.
 DHCP Server: From the drop down menu, DHCP server for this particular service zone may be Disabled,
Enabled or Relayed.
Please note that when “Enable DHCP Relay” is enabled, fill in the IP address of the external DHCP Server,
and the IP address of clients will be assigned by an external DHCP server. The system will only relay
DHCP information from the external DHCP server to downstream clients of this service zone. Please note
that Controller should be in the same subnet as the DHCP server.
When Enable DHCP Server option is selected, click Configure button to enter settings page.