User Manual

Wireless Mode
Select the desired wireless mode to which you want to
connect. This option only available under Ad-Hoc mode, it
allows user to select the prefer channel.
Prefer Channel Select the channel you would like to use under Ad-Hoc
mode. Channel 1 ~ 13.
Authentication
Mode
You MUST select the option to match the Wireless LAN you
wish to join. The available options are:
• Open System - Broadcast signals are not encrypted.
This method can be used only with no encryption or
with WEP.
• Shared Key - Broadcast signals are encrypted using
WEP. This method can only be used with WEP.
• Auto Switch - This is another WEP system; it will
select either Open System or Shared Key as required.
• WPA-PSK - PSK means "Pre-shared Key". You must
enter this Passphrase value; it is used for both authen-
tication and encryption. Please refer to Passphrase
section for more detail.
• WPA2-PSK - This is a further development of WPA-
PSK, and offers even greater security. You must enter
this Passphrase value; it is used for both authentication
and encryption. Please refer to Passphrase section for
more detail.
• WPA-Radius - This version of WPA requires a Radius
Server on your LAN to provide the client authentication
according to the 802.1x standard. Data transmissions
are encrypted using the WPA standard.
• WPA2-Radius - This version of WPA2 requires a
Radius Server on your LAN to provide the client au-
thentication according to the 802.1x standard. Data
transmissions are encrypted using the WPA2 standard.