User Manual

Levenhuk DTX 90
Digital Microscope
EN
Never, under any circumstances, look directly at the Sun,
another bright source of light or at a laser through this device,
as this may cause PERMANENT RETINAL DAMAGE
and may lead to BLINDNESS.
Microscope assembly
Take the microscope and all accessories out of the package. Place the stage on a stable surface. Attach the mount
locking ring (6) to the metal tube of the mount. Insert the metal tube into the opening on the stage and lock it in
place with the ring (6). Insert the microscope into the clamp on the mount arm and tighten the locking screw (5).
Tighten the locking knob (4) to lock the mount arm in place. Place a specimen on the stage and use the coarse
focus knob (1) to focus your view. Use the fine focus knob (3) for maximum precision and sharpness. Upon focusing
your view, tighten the focus lock knob (2) to lock the results.
MicroCapture software
Insert the installation CD into your CD drive. The Main Menu window will be displayed. Click the Install
MicroCapture to install the application and follow the instructions on screen. The installation CD contains
a copy of this User Guide, which you can read by clicking the corresponding entry in the Main Menu. Connect
the microscope to your PC with a USB cable and run the MicroCapture application. A pop-up message will warn you
if the microscope is not connected to the PC.
Microscope parts
Capture
an image
Start and stop
video recording
Sequence capture (you can set the time to begin
capturing images or videos, interval between them,
video duration and the number of images or videos
to be captured)
Full screen mode. To exit full screen mode,
press Escape on your keyboard or double-click
anywhere on the screen
The kit includes: microscope, mount, Levenhuk DTX installation CD,
user guide, calibration scale.
2
Brightness adjustment wheel
USB cable
Stage
Coarse focus knob
Focus lock knob
Fine focus knob
Mount arm locking knob
Locking screw
Mount locking ring