Wiring Diagram

ManualsBrandsLeviton Manufacturing ManualsElectrical EquipmentLumina RF Wall Switch and Wireless Load Controller

• Installs into any single gang device back-box.

• Supports Multi-gang installations.

• Requires Decora

faceplate, sold separately

WARNINGS

• TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT

BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!

• To be installed and/or used in accordance with appropriate electrical codes and

regulations.

• If you are unsure about any part of these instructions, consult an electrician.

CAUTIONS

• Use this device with copper or copper clad wire only.

• For indoor applications only.

• Save these instructions.

WARNING: TO AVOID FIRE, SHOCK, OR DEATH;

TURN OFF POWER at circuit breaker or fuse and

test that power is off before wiring!

1. Connect as per wiring diagram.

Before Installation

Installation

2. Attach to wall box.

3. Restore power and test ON/OFF operation. LED locator light

should be ON when switch power is turned OFF.

RF Wall Switch

Cat. No. ZS10S

Ratings: 120-277VAC, 50/60Hz.

INSTALLATION AND QUICK START SHEET

ENGLISH

DI-000-ZS10S-02B-X1

Line

120/277VAC,

50/60Hz.

Blue

White

Hot (Black)

Black

Neutral (White)

White

Load

Green

Ground

To release, push sides. Line up and press in to attach.

4. If desired, change switch color.

5. Install Decora faceplate.

White

Blue

Green

Black

Load

Neutral

Line (Hot)

Ground

Summary of content (3 pages)

PAGE 1
RF Wall Switch Cat. No. ZS10S Ratings: 120-277VAC, 50/60Hz. DI-000-ZS10S-02B-X1 ENGLISH INSTALLATION AND QUICK START SHEET WARNINGS • TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING! • To be installed and/or used in accordance with appropriate electrical codes and regulations. • I f you are unsure about any part of these instructions, consult an electrician. CAUTIONS • Use this device with copper or copper clad wire only.
PAGE 2
Installation (cont'd) 6. E nroll Device. Using your system, you may be able to program different PADDLE TOP - ON functionality, such as pushing the top of the paddle for a presentation scene or pushing the bottom of the paddle for OFF. PROGRAMMING Can be performed by pressing the top OR bottom of switch.
PAGE 3
ARTWORK PRINT SPECIFICATIONS DI-000-ZS10S-02B-X1 PART NUMBER REV DESCRIPTION Instruction Sheet SPECIFICATIONS : 1 Color(s): Artwork must be printed at 100% (1:1 scale) 1: Thickness: 40 lb.