User's Manual
![](/manual/leviton-manufacturing/vrsdc/1-user-s-manual-english/images/img-2.png)
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
LevitonwarrantstotheoriginalconsumerpurchaserandnotforthebenetofanyoneelsethatthisproductatthetimeofitssalebyLevitonisfreeofdefectsinmaterialsandworkmanshipundernormalandproperuseforveyearsfrom
thepurchase date.Leviton’s onlyobligation isto correctsuch defectsbyrepairorreplacement,atitsoption,ifwithinsuchveyearperiodtheproductisreturnedprepaid, withproof ofpurchase date,and adescription ofthe problemto
Leviton Manufacturing Co., Inc., Att: Quality Assurance Department, 201 North Service Road, Melville, New York 11747.Thiswarranty excludesandthere isdisclaimedliability forlaborfor removalofthis productorreinstallation.
Thiswarrantyis void ifthis product isinstalledimproperly or inanimproper environment, overloaded,misused,opened, abused, oraltered in anymanner, or isnot used undernormaloperating conditions ornotin accordance withany
labelsorinstructions.There are no other or implied warranties of any kind, including merchantability and tness for a particular purpose,butifanyimpliedwarrantyisrequiredbytheapplicablejurisdiction,thedurationofanysuch
implied warranty, including merchantability andtnessfor a particular purpose, is limited to ve years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or
loss of use of, any equipment, lost sales or prots or delay or failure to perform this warranty obligation.Theremediesprovidedhereinaretheexclusiveremediesunderthiswarranty,whetherbasedoncontract,tortorotherwise.
OPERATION
NOTE: Forcompletedetailsonoperatingthe
PrimaryProgrammer/Remote,refertothe
individualdevice’sinstructionguide.
ON:ThiscommandwillBRIGHTENthelightsto
thelastlevelset.
OFF:ThiscommandwillDIMthelightstoOFF.
BRIGHTEN:ThiscommandwillBRIGHTENthe
lightstothedesiredlevel.
DIM:ThiscommandwillDIMthelightstothe
desiredlevel.
MANUAL ON:IfSceneCapablePlug-InLamp
DimmingModuleisOFF,turntheswitchlocated
onthecontrolledlampOFFforafewseconds,
thenONagain.Themodulewillturnthelamp
ONtofullBRIGHT.Thisprocedurecanbe
usedtoturnONthelampwithoutaccessingthe
transmitter.
NOTE:Ifapowerinterruptionshouldoccurwhile
thedeviceisON,thelightloadwillreturntoits
previousstatewhenpowerisrestored.
NOTE: TheSceneCapablePlug-InLamp
DimmingModulecancontroltheLoadbefore
beingincludedintheZ-Wave
®
network.After
poweringupmodule,wait10seconds,thenpress
theProgrammingON/OFFbuttontoturntheLoad
ONorOFF.
IftheSceneCapablePlug-InLampDimming
Moduleappearstobefunctioningimproperly,
proceedwiththefollowingsteps:
1.Conrmthatthedeviceisbeingsuppliedfrom
a120V,60HzACsourceONLY.
2.ConrmthattheLoadbeingcontrolledisin
properworkingorder(localswitchisON)and
checkforburned-outbulbs.
3.Conrmthattheloadbeingcontrolleddoesnot
exceedthe300Wmodulelimit.
4.Conrmthattheunitisprogrammedproperly.
SelectDeviceListtoverifythatithasbeen
includedintoZ-Wave
TM
network.
TROUBLESHOOTING
DI-030-VRP03-02A-X1©2009LevitonMfg.Co.,Inc.
For additional information, contact Leviton’s
Techline at 1-800-824-3005 or visit Leviton’s
website at www.ViziaRFplus.com
ProtectedunderU.S.PatentNumber6,388,399
andpatentspendingandlicensedunder
U.S.PatentsNumbers5,905,442,and5,982,103
NOTE:Itisveryimportanttoaccurately
Excludedevicesfromthenetworkwhen
movingorremovingadevicefromaZ-Wave
®
network.Thisensuresthatallinformationhas
beenremovedfromyourPrimaryProgrammer/
Remote’sinformationtableandisnotcounted
ontobeapartofthemeshnetwork.
A)IfusingaLevitonZ-Wave
®
Programmer/
Remote,Cat.No.VRCPG,presstheMenu
buttonandscrolldowntoSystem.Press
thecenterbuttontoselectSystemMenu.
ChooseAdvanced.Pressthecenterbutton
toselectAdvancedInstall.
B)
Whilestandingclosetothemodule
(approximately1foot),pressthecenter
buttonto<Exclude>devicefromthenetwork.
NOTE:Onlyonedevicemaybeexcludedat
atime.
C) WhiletheProgrammer/Remoteisinthe
ExclusionmodeandtheLEDisONonthe
SceneCapablePlug-InLampDimming
Module,presstheON/OFFbuttononthe
module.TheProgrammer/Remotewillverify
ExclusionandtheLEDwillturnOFFon
theSceneCapablePlug-InLampDimming
Module.
IftheSceneCapablePlug-InLampDimming
ModuleisashingAmberwhileinthe
Exclusionmode,theProgrammer/Remoteis
stilltryingtocommunicatewiththemodule.
Waituntilthedevicestopsashing,then
presstheON/OFFbutton.
Excluding Plug-In Lamp
Dimming Module from
Network:
Step 4
Factory Default:
Ifyourmoduleisnotresponding,oryouare
unabletocontrolitafteryouhavetriedtoInclude/
Excludeitmultipletimes,itmaybenecessaryto
resetthemoduletoitsoriginalfactorysettings.To
accomplishthis,proceedasfollows:
• Unplugthemoduleandwait5seconds.Plug
themodulebackinandwithin20seconds
pressandholdtheprogrammingbuttonuntil
theLEDturnsAmberandthenturnsRed.
Themoduleisnowreset.Oncethemoduleis
reset,itwillbenecessarytoRe-Includeittoa
networkbeforeitcanbeused.
CAUTION:SETTINGADEVICETOAFACTORY
DEFAULTDOESNOTEXCLUDETHATDEVICE
FROMANETWORK.THEEXCLUSION
PROCEDUREMUSTSTILLBEFOLLOWEDTO
REMOVETHEDEVICEFROMTHEPRIMARY
REMOTE’SINFORMATIONTABLE.FAILURE
TODOSOMAYRESULTINSYSTEMTHAT
ISSLOWTORESPOND,ORMAYFAILTO
RESPONDTOSOMEDEVICES.IFYOUHAVE
TORESETTHECONTROLLERWITHOUT
EXCLUDINGITGOTOTHEREMOVEFAILED
MENUANDREMOVETHISDEVICEFROM
YOURVRCPGREMOTE.REFERTOVIZIARF+
APPLICATIONGUIDE(WWW.LEVITON.COM).
Wall Receptacle
Lamp Plug
Scene Capable Plug-In
Lamp Dimming Module
NOTE: Programmer/Controller must be in close
proximity (approx. 1 foot) to Scene Capable Plug-In
Lamp Dimming Module when including into network
VRCPG Programmer/
Controller
MANUAL OPERATION:
ON: PressthebuttonontheScenePlug-InLamp
DimmingModuletoturnthelightsfromOFFto
ON.
NOTE:ThelightswillturnONfullBRIGHT
regardlessofthelastlevelset.
OFF:PresstheON/OFFbuttontoturnthelights
fromONtoOFF.
BRIGHTEN:PressandholdtheON/OFFbutton
toBRIGHTENthelightstothedesiredlevel.
DIM:PressandholdtheON/OFFbuttontoDIM
thelightstothedesiredlevel.
Including Scene
Capable Plug-In
Lamp Dimming
Module into
Z-Wave
®
Network:
Step 3 cont’d Step 4 cont’d
Press ON/OFF Button
FCC COMPLIANCE STATEMENT
ThisdevicecomplieswithPart15oftheFCC
Rules.Operationissubjecttofollowingtwo
conditions:(1)thisdevicemaynotcause
harmfulinterference,and(2)thisdevicemust
acceptanyinterferencereceived,including
interferencethatmaycauseundesired
operationofthedevice.
Thisequipmenthasbeentestedandfound
tocomplywiththelimitsforaClassBDigital
Device,pursuanttoPart15oftheFCC
Rules.Theselimitsaredesignedtoprovide
reasonableprotectionagainstharmful
interferenceinaresidentialinstallation.
Thisequipmentgenerates,uses,andcan
radiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththe
instructions,maycauseharmfulinterference
toradiocommunications.However,thereis
noguaranteethatinterferencewillnotoccur
inaparticularinstallation.Ifthisequipment
doescauseharmfulinterferencetoradioor
televisionreception,whichcanbedetermined
byturningtheequipmentOFFandON,
theuserisencouragedtotrytocorrectthe
interferencebyoneormoreofthefollowing
measures:
• ReorientorrelocatethereceivingAntenna.
• Increasetheseparationbetweenthe
equipmentandthereceiver.
• Connecttheequipmentintoanoutleton
acircuitdifferentfromthattowhichthe
receiverisconnected.
• Consultthedealeroranexperiencedradio/
tvtechnicianforhelp.
FCC CAUTION
Anychangesormodicationsnotexpressly
approvedbyLevitonManufacturingCo.,Inc.,
couldvoidtheuser'sauthoritytooperatethe
equipment.