Instructions / Assembly

ManualsBrandsLeviton ManualsElectrical15 Amp Industrial Grade Heavy Duty Double-Pole Double-Throw Center-Off Maintained Contact Toggle Switch, Brown

For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com

INSTALLATION

ENGLISH

PK-93107-10-02-0D

LIMITED 10 YEAR WARRANTY AND EXCLUSIONS

Leviton warrants to the original consumer purchaser and not for the beneﬁt of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper

use for ten years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty

excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused,

opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including

merchantability and ﬁtness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and ﬁtness for a

particular purpose, is limited to ten years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment,

lost sales or proﬁts or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.

FOR CANADA ONLY

For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality Assurance Department, 165 Hymus

Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.

WARNINGS AND CAUTIONS

• TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER at circuit breaker or fuse and test that power

is off before wiring!

• To be installed and/or used in accordance with appropriate electrical codes and regulations.

WARNINGS AND CAUTIONS

• If you are unsure about any part of these instructions, consult an electrician.

• Use this device with copper or copper-clad wire only.

• SAVE THESE INSTRUCTIONS.

Maintained and Momentary Contact Switches

Single Pole Single Throw

Cat. No. 1080, 5655, 56080

Single Pole Double Throw Center-Off

Cat. No.1081, 1256, 1257, 1260, 1281, 1285, 1287, 5657, 5685, 56081

Double Pole Double Throw Center-Off

Cat. No. 1262, 1282, 1286, 1288, 5686

PK-93107-10-02-0D

INSTALLATION

WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING!

To Side Wire: Remove insulation from wires to expose 3/4” (1.9 cm) of conductor. Loop wires clockwise 3/4 turn around terminal screws. Firmly tighten screws over wire loops.

To Back Wire: Remove insulation per strip gauge on device. Insert wires into appropriate wire well and tighten screw ﬁrmly.

For Single Pole, Single Throw Switches (ﬁg. 1).

Connect wires per appropriate WIRING DIAGRAM as follows:

BLACK (Hot) wire from power source to the (L1) screw. BLACK wire from Load #1 to (A1) screw. GREEN or BARE (Ground) wire to GREEN screw.

For Single Pole, Double Throw, Center OFF Switches (ﬁg. 2).

Connect wires per appropriate WIRING DIAGRAM as follows:

BLACK (Hot) wire from power source to the (L1) screw. BLACK wire from Load #1 to (A1) screw. BLACK wire from Load #2 to (B1) screw. GREEN or BARE (Ground) wire to GREEN screw.

For Double Pole, Double Throw, Center OFF Switches (ﬁg. 3).

Connect wires per WIRING DIAGRAM as follows:

Circuit A Line Hot wire to the (L1) screw. Circuit B Line Hot wire to the (L2) screw. First Load wire from Load #1 to the (A1) screw. Second Load wire from Load #1 to the (A2) screw. First Load wire from Load #2 to the

(B1) screw. Second Load wire from Load #2 to the (B2) screw. GREEN or BARE (Ground) wire to the GREEN screw.

Mount device using long mounting screws. Attach wallplate. Restore power at circuit breaker or fuse.

Figure 4: Catalog numbers and Ratings / Figure 4 : modèles et valeurs nominales

Figura 4: Números de catálogo y Capacidad

SPST

UPUD

UPSP

SPDT Center-Off

UPBD à mise hors

tension centrale

UPDP Apagado

en el Centro

DPDT Center-Off

BPBD à mise hors

tension centrale

BPDP Apagado

en el Centro

Side Wire AWG

Calibre,

câblage latéral

Cable lateral

Back Wire AWG

Calibre,

câblage arrière

Cable posterior

Rating

Valeurs nominales

Clasiﬁcación

AC Horsepower Rating (HP)

Puissance nominale

(ch en c.a.)

Potencia Nominal (HP) CA

Industrial Grade - Maintained Contact Toggle Switch / Qualité industrielle – Interrupteur à levier à contacts maintenus

Grado Industrial – Interruptor de Palanca de Contacto Mantenido

- 1281 1282 #12-#14 AWG #10-#14 AWG 15A-120/277VAC/V c.a./VCA 1/2@120VAC/V c.a./VCA, 2@240VAC/V c.a./VCA, 12A Max.

- 1285 1286 #12-#14 AWG #10-#14 AWG 20A-120/277VAC/V c.a./VCA 1@120VAC/V c.a./VCA, 2@240VAC/V c.a./VCA, 16A Max.

- 1287 1288 #12-#14 AWG #10-#14 AWG 30A-120/277VAC/V c.a./VCA 2@120VAC/V c.a./VCA, 2@240VAC/V c.a./VCA, 24A Max.

Industrial Grade - Momentary Contact Toggle Switch / Qualité industrielle – Interrupteur à levier à contacts momentanés

Grado Industrial – Interruptor de Palanca de Contacto Momentáneo

1080 1081* - #12-#18 AWG #10-#14 AWG 3A-24V AC/DC/V c.a./V c.d./VCA/CD -

1258 1256 - #12-#14 AWG #10-#14 AWG 15A-120/277VAC/V c.a./VCA 1/2@120VAC/V c.a./VCA, 2@240VAC/V c.a./VCA, 12A Max.

- 1257 - #12-#14 AWG #10-#14 AWG 20A-120/277VAC/V c.a./VCA 1@120VAC/V c.a./VCA, 2@240VAC/V c.a./VCA, 16A Max.

- 1260 1262 #12-#14 AWG #10-#14 AWG 30A-120/277VAC/V c.a./VCA 2@120VAC/V c.a./VCA, 2@240VAC/V c.a./VCA, 24A Max.

Commercial Grade - Maintained Contact Decora Plus Switch / Qualité commerciale – Interrupteur Decora Plus à contacts momentanés

Grado Comercial – Interruptor Decora Plus de Contacto Mantenido

- 5685 5686 #12-#14 AWG #10-#14 AWG 15A-120/277VAC/V c.a./VCA 1/2@120VAC/V c.a./VCA, 2@240VAC/V c.a./VCA, 12A Max.

Commercial Grade - Momentary Contact Decora Plus Switch / Qualité commerciale – Interrupteur Decora Plus à contacts momentanés

Grado Comercial – Interruptor Decora Plus de Contacto Momentáneo

56080 56081* - #12-#18 AWG #10-#14 AWG 3A-24V AC/DC/V c.a./V c.d./VCA/CD -

5655 5657 - #12-#14 AWG #10-#14 AWG 15A-120/277VAC/V c.a./VCA 1/2@120VAC/V c.a./VCA, 2@240VAC/V c.a./VCA, 12A Max.

* NOTE: For DC voltage applications "Hot" is replaced by "+" and "Neutral" is replaced by "–".

* NOTA: Para aplicaciones con voltaje CC, “Vivo” es reemplazado por “+” y “Neutro” es reemplazado por “-“.

* REMARQUE : dans les installations à courant continu, le terme « actif » est remplacé par un « + », et le terme « neutre », par un « - ».

Hot (Black)

Actif (Noir)

Fase (Negro)

Black/Noir/Negro

White

Blanc

Blanco

Neutral (White)

Neutre (Blanc)

Neutro (Blanco)

Load 1

Charge 1

Carga 1

Figure 1: Single Pole, Single Throw

Figure 1 : unipolaire, unidirectionnel

Figura 1: Sencillo unipolar de una posición

Green Ground / Terre (vert)

Verde a tierra

Hot (Black)

Actif (Noir)

Fase (Negro)

Black/Noir/Negro

Black

Noir

Negro

White/Blanc/Blanco

White

Blanc

Blanco

Neutral (White)

Neutre (Blanc)

Neutro (Blanco)

Load 2

Charge 2

Carga 2

Load 1

Charge 1

Carga 1

Figure 2: Single Pole, Double Throw, Center Off

Figure 2 : unipolaire, bidirectionnel, mise hors tension

Figura 2: Unipolar, Dos Posiciones, Apagado en el Centro

Green Ground / Terre (vert)

Verde a tierra

Line Hot (circuit A)

Actif (circuit A)

Linea Fase (Circuito A)

Line Hot (circuit B)

Actif (circuit B)

Linea Fase (Circuito B)

Load 2 (circuit A)

Charge 2 (circuit A)

Carga 2 (Circuito A)

Load 1

(circuit A)

Charge 1

(circuit A)

Carga 1

(Circuito A)

Load 2 (circuit B)

Charge 2 (circuit B)

Carga 2 (Circuito B)

Load 1

(circuit B)

Charge 1

(circuit B)

Carga 1

(Circuito B)

Load 2

Charge 2

Carga 2

Load 1

Charge 1

Carga 1

Figure 3: Double Pole, Double Throw, Center Off

Figure 3 : bipolaire, bidirectionnel, mise hors tension

Figura 3: Bipolar, Dos Posiciones, Apagado en el Centro

Green Ground / Terre (vert)

Verde a tierra

WEB VERSION

Summary of content (2 pages)

PAGE 1
Maintained and Momentary Contact Switches Single Pole Single Throw Cat. No. 1080, 5655, 56080 Single Pole Double Throw Center-Off Cat. No.1081, 1256, 1257, 1260, 1281, 1285, 1287, 5657, 5685, 56081 Double Pole Double Throw Center-Off Cat. No. 1262, 1282, 1286, 1288, 5686 WARNINGS AND CAUTIONS WARNINGS AND CAUTIONS • TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER at circuit breaker or fuse and test that power • If you are unsure about any part of these instructions, consult an electrician.
PAGE 2
Interrupteurs à contacts maintenus et momentanés Interruptores de Contacto Mantenido y Momentáneo Unipolaires, unidirectionnels Nos de cat. 1080, 5655, 56080 Unipolaires, bidirectionnels, mise hors tension centrale Nos de cat. 1081, 1256, 1257, 1260, 1281, 1285, 1287, 5657, 5685, 56081 Bipolaires, bidirectionnels, mise hors tension centrale Nos de cat. 1262, 1282, 1286, 1288, 5686 Sencillo unipolar de una posición No. de Cat. 1080, 5655, 56080 Unipolar, Dos Posiciones, Apagado en el Centro No. de Cat.