Full Product Manual

6
Non-Metallic FD Boxes
Our non-metallic FD Boxes are constructed of a rigid PVC, making them
extremely durable and resistant to impact, chemicals, solvents
and other harsh industrial conditions. They are available in
yellow and gray one-, two- and three-gang unthreaded
configurations that will readily accept PVC conduit.
1. Non-metallic boxes feature 1" diameter
unthreaded conduit openings, and include
reducers for ¾" and ½" PVC conduit. They also
include plugs for unused openings.
An external flange with mounting holes
makes them excellent for wall mounting.
Our boxes comply with UL and CSA standards
and have enclosure ratings of NEMA Type 4, 4X,
12 and IEC IP66 watertight and dust-tight when
used in conjunction with Leviton’s Wetguard devices.
2. TPV gasket assures maximum watertight and
dust-tight seal between frame and box.
3. Our patent-pending “modular” frame design allows the
combining of a variety of single-gang devices in multi-gang
configurations without the need for dedicated two-, and
three-gang cover plates! This gives you the ability to create
custom power distribution boxes specific to your needs.
4. Stainless steel device mounting plates facilitate mounting of single
receptacles and toggle switches with an 8-inch long, 12 AWG ground wire lead.
5. TPV gasket on all Wetguard covers assures maximum watertight and dust-tight seal
between device cover and frame.
6. Single-gang Wetguard devices and covers fit in any frame position and provide excellent
protection from water and dust ingress. Plus, our boxes feature up to 30% more volume than
competitive boxes, making it easier to install devices.
wetguard
®
Wiring devices
sold separately
1.
2.
3.
4.
5.
6.