Installation Manual

Series
Series 1000 and Series 2000 Installation Manual
Leviton Manufacturing Co., Inc. 11
3. Installation Instructions
The following section contains installation and wiring instructions for the Leviton Series 2000
multiple meter unit. If technical assistance is required at any point during the installation,
contact information can be found at the end of this manual. Leviton is not responsible for
damage to the meter caused by incorrect wiring.
3.1. Explanation of Warning Symbols
Indicates the need to consult the operation manual due
to the presence of a potential risk.
Indicates the presence of electric shock hazards. Prior
to proceeding, de-energize the circuit and consult the
operation manual.
3.2 Safety Precautions
WARNING
 Installation of electric meters requires working with possibly hazardous
voltages. These instructions are meant to be a supplement to aid
trained, qualified professionals.
 Turn off all power supplying the equipment before performing any wiring
operations. Use a properly rated voltage sensing device to confirm
power is off.
 Bonding is not automatic for metal conduit connections; separate
bonding is to be provided.
 Installations should be done in accordance with local codes and current
National Electric Code requirements.
 Equipment used in a manner not specified by this document impairs the
protection provided by the equipment.
Failure to follow these warnings could result in serious injury or death.