Cut Sheet
PRODUCT SPECIFICATIONS
41290-SMx, 41290-DMx
Multimedia Outlet System Wallplates
41290-SMx, 41290-DMx
APPLICATION
Multimedia Outlet System (MOS) Wallplates provide
ush-mount workstation connectivity for copper, ber,
and multimedia applications. Wallplates accept all MOS
modules.
SPECIFICATION
Wallplates shall be front-loading, individual port
congurable such that re-conguration shall be possible
from the front without requiring removal or detachment
of the wallplate. Wallplate mounting screw holes shall
be slotted to permit levelling in crooked wallboxes,
and shall be hidden behind labeling identication
windows at the top and bottom of each wallplate
opening. Label areas shall be compatible with
ANSI/TIA-606-B labeling requirements. Wallplates shall
be available in the following colors: white, light almond,
ivory, grey, or black. Connectors shall be available
in 13 colors to allow color-coded port ID. Colors and
congurations to be specied per schedule on plan.
FEATURES
• Ideal for locations where an aesthetic ush-mount
look is important
• Slotted mounting holes let installers level the plate
if backbox is crooked
• Different colored modules are available to identify
ports, or labels can be applied in the protected label
identication windows
• Dual-gang plates can be used with a ber storage ring
(41290-DRx)
Page 1 of 2
DESIGN CONSIDERATIONS
• Accepts 1, 1.5, 2, and 3 unit high inserts
• Use 2-port QuickPort
®
Module Adapter (ush or angled versions)
to house simplex QuickPort Modules
• Wallplates mount to standard NEMA openings, single- and
dual-gang backboxes, or four-square boxes with appropriate
reducer/adapter
• Fill unused spaces with blank modules for a secure tting and to
prevent debris from entering wallplate
INSTALLATION NOTES
• The plate attaches with screws to wallbox or backbox
• Inserts snap in/out of wallplate from front
• Self-leveling feature allows adjustment
• Limit wire untwisting to 0.5 inches from termination point
• Limit cable jacket removal to a minimum
• Observe cable manufacturer's recommended bend radius
• 1.5-unit angled QuickPort modules used in the top half of
the wallplate may result in an interference when using ber
connectors and the ber storage ring (41290-DRx)
STANDARDS COMPLIANCE
• ANSI/TIA-568-C
• ANSI/TIA-1096-A
• cULus Listed (UL1863, CAN/CSA C22.2 No. 182.4-M90)
PHYSICAL SPECIFICATIONS
Capacity: Each wallplate opening (gang) has a three-unit
capacity for connector inserts:
• Three 1 unit high inserts
• Two 1.5 unit high inserts
• One 2 unit high and one 1 unit high insert
• One 3 unit high insert
Single-gang wallplate has three units worth of
space, providing 1 to 12 ports (depending on the
conguration)
Materials: High-impact self-extinguishing ABS plastic rated
UL 94V-0
Dimensions: See page two
COUNTRY OF ORIGIN
Mexico
WARRANTY INFORMATION
For warranty information go to leviton.com/warranty
www.leviton.com/warranty.
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
tel 1-800-824-3005
tel +1-425-486-2222
appeng@leviton.com
www.leviton.com
Asia / Pacic
T +1.631.812.6228
E infoasean@leviton.com
Canada
T +1.514.954.1840
E pcservice@leviton.com
Caribbean
T +1.954.593.1896
E infocaribbean@leviton.com
China
T +852.2774.9876
E infochina@leviton.com
Colombia
T +57.1.743.6045
E infocolombia@leviton.com
Europe
T +33.6.8869.1380
E infoeurope@leviton.com
India / SAARC
T +971.4.886.4722
E infoindia@leviton.com
Mexico
T +52.55.5082.1040
E lsamarketing@leviton.com
Middle East & Africa
T +971.4.886.4722
E lmeinfo@leviton.com
South Korea
T +82.2.3273.9963
E infokorea@leviton.com
Copyright © 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised August 2015