Cut Sheet

Component
Specifications
3880-DIN
Versi-Duct
®
Horizontal Cable Management System
Versi-Duct
®
Horizontal Cable Management System
Part Numbers
491RU-HFR 492RU-HFR
491RU-HFO 492RU-HFO
2222 – 222nd St. SE • Bothell, WA 98021 USA
Tel: [phone] • Fax: [phone] • Int'l Fax: [phone] • GSA Schedule Available.
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005.
Spec sheets and updates are also available at www.levitonvoicedata.com.
WARRANTY INFORMATION
For a copy of Leviton product warranties, log on to
www.levitonvoicedata.com/warranty.
For ELECTRONIC Typical Specs see (.TXT) file on disk.
TYPICAL SPECIFICATION
Cable Management System shall mount horizontally to a
standard 19" equipment rack. The system shall be designed with
slotted duct configuration for copper and fiber cabling systems. It
shall be cULus listed and compliant with TIA/EIA-568-B
standards. The material shall be PVC rated for 94V-0. It shall have
a duct cover, and bend-radius compliant router to transition
between horizontal and vertical slotted ducts.
See ELECTRONIC FILES for CAD files (.DXF, .DWG, MS-DOS.EPS) on disk
APPLICATION
A horizontal cable management system in a slotted duct
configuration designed to route cable and mount onto a standard
19" equipment rack. The ducts also come with concealing covers
and an assortment of cable management accessories.
STANDARDS COMPLIANCE
Meets or exceeds all applicable standards: cULus listed and
complies with TIA/EIA-568-B.
PHYSICAL SPECIFICATIONS
Dimensions: See second page.
Materials: PVC rated for 94V-O.
DESIGN CONSIDERATIONS
• Use on front and back of cable rack to route and manage cables.
• Use with either fiber or copper cabling system.
• Bend-radius Compliant Cable Router complies with TIA/EIA-
568-B standards, ensuring 1.18" bend radius.
ACCESSORIES
• Bend-Radius Compliant Router - Routes copper or fiber cable
from inside the horizontal duct to the vertical duct. Maintains 1.18" bend
radius minimum. (4 per horizontal cable management system. Also sold
separately.)
Accessories sold separately:
• Cable Retainer -
Adjusts to slide along the duct finger and
includes break-away detail to accommodate all duct sizes.
• Bend-Radius Compliant Router - Routes copper or
fiber cable from inside the horizontal duct to the vertical duct.
Maintains 1.18" bend-radius minimum.
• Extended Covers - Extended Covers are designed to
conceal cables transitioning from horizontal to vertical ducts.
• Duct Cover Hinge - The Duct Cover Hinge is designed to
easily open and close duct cover for increased protection and
easy access.
(Accessories depicted on the back page.)