Cut Sheet

ManualsBrandsLeviton ManualsAudioConnector, Multimode, Pre-Polished, Fiber Optic, FastCam SC, Beige

Component

Specifications

3880-DIN

FastCAM™ Pre-Polished Connectors

Part Number

49991-XSX, 49996-XSX

49800-XMK

2222 – 222nd St. SE • Bothell, WA 98021 USA

Tel: 1-800-722-2082 / 1-425-485-4288 • Fax: 1-425-483-5270 • Int'l Fax: 1-425-485-9170 • GSA Schedule Available.

For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005.

Spec sheets and updates are also available at www.levitonvoicedata.com.

WARRANTY INFORMATION

For a copy of Leviton product warranties, log on to

www.levitonvoicedata.com/warranty.

TYPICAL SPECIFICATION

The mechanical fiber optic connector shall meet or exceed

the requirements described in TIA/EIA 568B. Connector shall

be of a design that facilitates rapid termination and deployment.

Connectors shall be available in both SC and ST, 250 or 900µm,

and Single-mode or Multimode (50µm and 62.5µm) configurations.

Connector Insertion Loss shall be no greater than 0.5dB, with an

average of 0.2dB.

ELECTRONIC FILES

For CAD files, Typical Specs, or Dimensional Line Art (.DXF, .DWG,

MS-DOS.eps or .TXT), log on to www.levitonvoicedata.com.

APPLICATION

Leviton’s new FastCAM Connectors are pre-polished, field-installable

connectors that eliminate the need for hand polishing in the field.

FastCAM connectors are available in SC or ST, 250 or 900µm,

Single-mode or Multimode (50µm and 62.5µm) configurations.

FastCAM Connectors provide an immediate termination to either

single-mode or multimode fibers.

FEATURES

• Precision mechanical termination

• Fast and easy to install

• No polishing, no epoxy curing, no special tools

• Low insertion loss connection

• Uses proven molded v-groove technologies

STANDARDS COMPLIANCE

Meets TIA/EIA 568B performance requirements

PHYSICAL SPECIFICATIONS

DESIGN CONSIDERATIONS

• For use in Data Centers or applications requiring fast network

deployment

• Single-mode and multimode versions

• Not recommended for Outside Plant applications/installations

Pictured: SC Connector (above), ST Connector (below)

Specifications

PARAMETER VALUE

Insertion Loss (Single-mode or Multimode): Average: 0.2dB, Maximum: 0.5dB

Return Loss (Single-mode): Average: 56.4 dB, Minimum: 45dB

Operating Temperature: -40ºC to +75ºC

Summary of content (2 pages)

PAGE 1
Part Number Component Specifications 3880-DIN 49991-XSX, 49996-XSX 49800-XMK FastCAM™ Pre-Polished Connectors Leviton’s new FastCAM Connectors are pre-polished, field-installable connectors that eliminate the need for hand polishing in the field. FastCAM connectors are available in SC or ST, 250 or 900µm, Single-mode or Multimode (50µm and 62.5µm) configurations. FastCAM Connectors provide an immediate termination to either single-mode or multimode fibers.
PAGE 2
FastCAM™ Pre-Polished Connectors Part Number 49991-XSX, 49996-XSX 49800-XMK DIMENSIONAL LINE ART For Dimensional Line Art (.DXF, .DWG, MS-DOS.eps or .TXT), log on to www.levitonvoicedata.com. 1.81" 1.77" .035" .029" .038" SC Connector ST Connector Leviton FastCAM Connectors Description 1 per bag 6 per bag FastCAM ST MM 62.5µm 49991-MST 49996-MST FastCAM ST MM 50µm 49991-5ST 49996-5ST FastCAM ST SM 49991-SST 49996-SST FastCAM SC MM 62.