Product Overview
Page 1 of 2
Copyright © 2021 Leviton Manufacturing Co., Inc. All rights reserved.
Leviton reserves the right to modify product specications without notice.
Revised December 2021
APPLICATION
The GigaMax Cat 5e UTP QuickPort Jack is designed to be
used with any Category 5e UTP structured cabling system.
The modular connector features a one-piece narrow design
that supports high port density in a small area, and is ideal for
use in residential, MDU, and high-megabit applications.
SPECIFICATION
The modular jack shall meet or exceed requirements for
Category 5e described in the ANSI/TIA-568.2-D standard,
as well as the Class D requirements described in ISO/IEC
11801-1. The jack shall be compliant with ANSI/TIA-1096-A,
cULus listed, and be independently veried for electrical
transmission performance. In addition to Category 5e
compliance, the jack shall have the ability to support high
megabit and shared-sheath applications. All plastics used in
construction of the connector bodies shall be re-retardant
with a UL ammability rating of 94V-0. Termination of all jacks
shall be 110-type IDC with solder-plated phosphor bronze
contacts. The jack shall provide a ledge directly adjacent
to the 110-style termination against which the wires can be
directly terminated and cut in one action by the installer. Jack
wiring label shall provide installation color codes for both
T568A and T568B wiring schemes. The modular hardware
shall t all other installed telecommunications wallplates,
outlets and eld-congurable patch panels and patch blocks.
COUNTRY OF ORIGIN
USA
PRODUCT SPECIFICATIONS
5G108-xx5
GigaMax
™
Cat 5e UTP QuickPort
™
Jack
5G108-xx5
FEATURES
• Available in 13 colors
• Dual wiring code label allows connector to be wired to
either T568A or T568B
• Individual port congurability allows specication exibility
• Robust one-piece lead-frame design increases power-
carrying capacity and efciency, while providing improved
durability
• Narrow connector allows high port density in a small area
• Will exceed IEEE 802.3bt standard up to 0.7 amps (140
watts) continuously
• Supports high-megabit and shared-sheath applications
• Available individually, in bulk packages of 25, and in bulk
packages of 150 with a JackRapid
™
Punchdown Tool
DESIGN CONSIDERATIONS
• Use in any QuickPort housing to support GigaMax Cat 5e
UTP connectivity in surface-mount, ush-mount, or modular
furniture outlets, or patch panels and patch blocks
• Can be used in conjunction with other QuickPort snap-in
modules for voice/data and video applications over UTP,
coax and ber
• To ID ports, use different colored modules for each
application
STANDARDS & REGULATIONS
• ANSI/TIA-568.2-D (Cat 5e)
• ISO/IEC 11801-1 (Class D)
• ANSI/TIA-1096-A (Formerly FCC Part 68)
• cULus Listed (UL 1863)
• Power over HDBaseT
™
PoH (95 Watts)
• IEEE 802.3bt PoE Type 1 (15.4 Watts) formerly 802.3af,
Type 2 (30 Watts) formerly 802.3at, Type 3 (60 Watts),
Type 4 (90 Watts)
• Cisco UPoE (60 Watts), UPoE+ (90 Watts)
• UL 2043 Plenum Certied
• RoHS 2 Compliant
MECHANICAL SPECIFICATIONS
Dimensions: See page two
Materials: Jack body is high-impact,
re retardant plastic rated
UL 94V-0.
Temperature (Storage): -40 ºC to +70 ºC
Temperature (Operating): -10 ºC to +60 ºC
WARRANTY INFORMATION
For Leviton product warranties, go to leviton.com/warranty
L20 SS1057ENv1