Specification

PRODUCT SPECIFICATIONS
5G108-xx5
GigaMax
®
Cat 5e UTP QuickPort
®
Connector
5G108-xx5
APPLICATION
The GigaMax Cat 5e UTP QuickPort Connector
is designed to be used with any Category 5e UTP
structured cabling system. The modular connector
features a one-piece narrow design that supports high
port density in a small area, and is ideal for use in
residential, MDU, and high-megabit applications.
SPECIFICATION
The modular connector shall meet or exceed requirements
for Category 5e described in the ANSI/TIA-568-C.2
specications. The connectors shall also be in compliance
with all National Electrical Codes; compliant with ANSI/
TIA-1096-A; UL listed; and independently UL Certied. In
addition to Category 5e compliance, the connector shall
have the ability to support high megabit and shared-sheath
applications. All plastics used in construction of the connector
bodies shall be re-retardant with a UL ammability rating
of 94V-0. Termination of all connectors shall be 110-type
IDC with solder-plated phosphor bronze contacts. The
connector shall provide a ledge directly adjacent to the
110-style termination against which the wires can be directly
terminated and cut in one action by the installer. Connector
wiring label shall provide installation color codes for both
T568A and T568B wiring schemes. The modular hardware
shall t all other installed telecommunications wallplates,
outlets and eld-congurable patch panels and patch blocks.
COUNTRY OF ORIGIN
USA
Page 1 of 2
FEATURES
• Available in 13 colors
• Dual wiring code label allows connector to be wired to either
T568A or T568B
• Individual port congurability allows specication exibility
• Robust one-piece lead-frame design
• Narrow connector allows high port density in a small area
• Performance supports high-megabit and shared-sheath
applications
• Available individually, in bulk packages of 25, and in bulk
packages of 150 with a JackRapid
TM
Punchdown Tool
DESIGN CONSIDERATIONS
• Use in any QuickPort
®
housing to support GigaMax Cat 5e
UTP connectivity in surface-mount, ush-mount, or modular
furniture outlets, or patch panels and patch blocks
• Can be used in conjunction with other QuickPort snap-in modules
for voice/data and video applications over UTP, coax and ber
• To ID ports, use different colored modules for each application
STANDARDS COMPLIANCE
• ANSI/TIA-568-C.2
• cULus listed
• ANSI/TIA-1096-A (Formerly FCC Part 68)
• IEEE 802.3at (Type 1) Power over Ethernet (PoE) up to 15.4 watts
• IEEE 802.3at (Type 2) PoE+ up to 30 watts
• IEEE 802.3bt (Type 3) PoE+ up to 60 watts
• Cisco Universal Power Over Ethernet (UPOE) up to 60 watts
PHYSICAL SPECIFICATIONS
Dimensions: See page two
Materials: Connector body is high-impact, re-retardant
plastic rated UL 94V-0.
Environmental
Conditions: Storage Temperature: -40 ºC to +70 ºC
Operating Temperature: -10 ºC to +60 ºC
WARRANTY INFORMATION
Limited product and limited extended warranties are rendered
VOID if the installed structured cabling system is used for Power
over Ethernet applications that exceed the product's specied
power rating.
For a copy of Leviton product warranties, visit
www.leviton.com/warranty.
Revised August 2016
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
tel [phone]
tel [phone]
[e-mail]
www.leviton.com
Asia / Pacic
T +1.631.812.6228
E [e-mail]
Canada
T +1.514.954.1840
E [e-mail]
Caribbean
T +1.954.593.1896
E [e-mail]
China
T +852.2774.9876
E [e-mail]
Colombia
T +57.1.743.6045
E [e-mail]
Europe
T +44.0.1592.772124
E [e-mail]
India / SAARC
T +971.4.886.4722
E [e-mail]
Mexico
T +52.55.5082.1040
E [e-mail]
Middle East & Africa
T +971.4.886.4722
E [e-mail]
South Korea
T +82.2.3273.9963
E [e-mail]
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.