Specification

PRODUCT SPECIFICATIONS
69586-Rxx
Cat 6 Recessed 110-Style Patch Panels
69586-Rxx
SPECIFICATION
Patch panels shall meet or exceed the requirements
for channel- and component-level performance as
described in ANSI/TIA-568-C.2 Category 6 standards,
as well as the Class E requirements described in ISO/
IEC 11801. The panels shall feature both T568A and
T568B wiring congurations, white IDC 110-punchdown
modules, mounting tabs for screwless cable management
bars, and a magnifying lens label holder with color-coded
front window labeling. The panels shall have universal
T568A and T568B wiring card for terminations. The panels
shall be made of 14-gauge steel, and shall have a black
powder-coated nish with white silk-screening. The plastic
elements shall be re retardant with a UL ammability
rating of 94V-0. The panels shall be offered in 24- and
48-port congurations. The patch panels shall be
congured with six-port modules. The panels shall be
recessed to provide clearance for patch cords when
wiring cabinet doors are shut. The 110 termination on
the rear of the panels shall follow normal installation color
sequence (blue, orange, green, brown) from left to right.
Page 1 of 2
FEATURES
• Patented Retention Force Technology protects tines from
damage from 4- or 6-pin plugs
• Craft-friendly installation
• Universal T568A and T568B wiring cards for 110-style IDC
terminations
• Color-coded front labeling for easy port identication
(ANSI/TIA-606-B compliant)
• Terminates 26-22 gauge solid conductors
• Capable of multiple re-terminations
• Magnifying lens label holder allows for easy port identication
DESIGN CONSIDERATIONS
• Mounts on 19-inch equipment racks
• Panel offered in 24- or 48-port congurations
• Connector modules are in groups of six
• Includes rear cable management bars
STANDARDS COMPLIANCE
• ANSI/TIA-568-C.2
• ISO/IEC 11801
• ANSI/TIA-1096-A (formerly FCC Part 68)
• cULus Listed
• IEEE 802.3at (Type 1) Power over Ethernet (PoE) applications
up to 15.4 watts
• IEEE 802.3at (Type 2) Power over Ethernet (PoE+) applications
up to 30 watts
• IEEE 802.3bt/D1.7 (Type 3) Power over Ethernet (PoE+)
applications up to 60 watts
• IEEE 802.3bt/D1.7 (Type 4) Power over Ethernet (PoE+)
applications up to 100 watts
• Cisco Universal Power Over Ethernet (UPOE) applications up
to 60 watts
• Power over HDBaseT
TM
(POH) applications up to 100 watts
PERFORMANCE SPECIFICATIONS
Dimensions: See page two
Capacity: 24 ports or 48 ports
Materials: 14-gauge steel, powder-coated black; PCB
and plastic components are rated per UL 94V-0
COUNTRY OF ORIGIN
USA
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit
www.leviton.com/warranty.
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
tel [phone]
tel [phone]
[e-mail]
www.leviton.com
Asia / Pacic
T +1.631.812.6228
E [e-mail]
Canada
T +1.514.954.1840
E [e-mail]
Caribbean
T +1.954.593.1896
E [e-mail]
China
T +852.2774.9876
E [e-mail]
Colombia
T +57.1.743.6045
E [e-mail]
Europe
T +33.6.8869.1380
E [e-mail]
India / SAARC
T +971.4.886.4722
E [e-mail]
Mexico
T +52.55.5082.1040
E [e-mail]
Middle East & Africa
T +971.4.886.4722
E [e-mail]
South Korea
T +82.2.3273.9963
E [e-mail]
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised April 2016
APPLICATION
Leviton Cat 6 Recessed 110-Style Patch Panels
are designed for use on standard 19-inch racks and
cabinets, and are best used in applications where the
back rail is positioned close to the rear doors, or in
applications with minimal depth in front of the panel.
Unique side supports allow patch cord management
in front of or behind the back rails. The patch panels
include patented Retention Force Technology which
promotes consistent performance over the life of the
system. The installer-friendly design allows for quick
110-style terminations on the rear of the panel, which
follow the normal installation color sequence (blue,
orange, green, brown) from left to right.