Submittal Sheet

Page 1 of 2
Copyright © 2021 Leviton Manufacturing Co., Inc. All rights reserved.
Leviton reserves the right to modify product specications without notice.
Revised March 2021
APPLICATION
Leviton Cat 6 Flat 110-Style Patch Panels are designed for
use on 19-inch standard racks and cabinets. Patch panels
include patented Retention Force Technology which promotes
consistent performance over the life of the system. Installer-
friendly design allows for quick installation due to standard
110 terminations on the rear of the panels which follows the
normal installation color sequence (blue, orange, green,
brown) from left to right. The Cat 6 system is designed for use
in high-megabit applications such as Gigabit Ethernet.
SPECIFICATION
Patch panels shall meet or exceed the requirements for
channel- and component-level performance as described in
ANSI/TIA-568.2-D Category 6 standards, as well as the Class
E requirements described in ISO/IEC 11801. Panels shall
feature both T568A and T568B wiring congurations, white
IDC 110-punchdown modules, mounting standoffs for cable
management bars, and color-coded front window labeling.
Panels shall have universal T568A and T568B wiring card for
terminations. Panels shall be made of 14-gauge steel, and
shall have a black nish with white silk-screening. The plastic
elements shall be re retardant with a UL ammability rating
of 94V-0. Panels shall be offered in 12-, 24, 48-, and 96-
port congurations as well as an 89D 12-port conguration.
Patch panels shall be congured with six port modules. The
110 termination on the rear of the panels shall follow normal
installation color sequence (blue, orange, green, brown) from
left to right. The panels shall exceed IEEE 802.3bt standard
up to 0.5 amps per conductor (100 watts) continuously.
Cat 6 Flat 110-Style Patch Panels
69586-xxx
FEATURES
• Patented Retention Force Technology protects tines from
damage and increases system longevity
• Craft-friendly installation
• Universal T568A and T568B wiring cards for 110-style IDC
terminations
• Color-coded front labeling for easy port identication
(ANSI/TIA-606-C compliant)
• Terminates 26-22 gauge solid conductors
• Centralized labeling (available on 48-Port) promotes
greater visibility of labels when patch cords are routed into
horizontal cable management above and below the
patch panel
• Capable of multiple re-terminations
• Panel available with patented magnifying lens label holder
for easy reading
• Will exceed IEEE 802.3bt standard up to 0.5 amps per
conductor (100 watts) continuously
• ETL veried to meet the IEC 60512-99-002 standard for
support of IEEE 802.3bt Type 4 PoE (90-watt) applications
DESIGN CONSIDERATIONS
• Mounts on 19-inch equipment racks
• Panel offered in 12-, 24-, 48-, 96-port congurations and
12-port U89 Block for wall-mount applications
• Connector modules are in groups of six
• Includes rear cable management bars
• Use star washers for grounding in rack-mount installations
STANDARDS & REGULATIONS
• ANSI/TIA-568.2-D (Cat 6)
• ISO/IEC 11801-1 (Class E)
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60512-99-002
• cULus Listed
• IEEE 802.3bt PoE Type 1 (15.4 Watts) formerly 802.3af,
Type 2 (30 Watts) formerly 802.3at, Type 3 (60 Watts),
Type 4 (90 Watts)
• Cisco UPoE (60 Watts), UPoE+ (90 Watts)
• Power over HDBaseT
™
PoH (95 Watts)
COUNTRY OF ORIGIN
USA
WARRANTY INFORMATION
For Leviton product warranties, go to leviton.com/warranty
C21 SS1086ENv1
PRODUCT SPECIFICATIONS
69586-xxx