Manualshelf

Installation Guide

ManualsBrandsLeviton ManualsElectricalMini Meter Single Element, 1PH, 2-Watt, 120-Volt, 0.1/ 0.01 kWh Isolated Outputs 0.1 kWh Counter Output, 100:0.1, Black
12345678910
Mini Meter Installation Manual
Leviton Manufacturing Co., Inc. 7
Outputs
10, Isolated Output (10 Wh/P, Kh = 10) Isolated pulse output: 5 watthours on, 5
watthours off, referenced to ISOL COM
NOT TO BE USED FOR FIELD WIRING
100, Isolated Output (100 Wh/P, Kh=100) Isolated pulse output: 50 watthours on, 50
watthours off, referenced to ISOL COM
1000, Isolated Output (1 kWh/P, Kh=1000) Isolated pulse output: 500 watthours on, 500
watthours off, referenced to ISOL COM (not
available on models with T suffix)
ISOL COM Isolated common for 10/100/1000 isolated
outputs
Counter (kh = 100 or kh = 1000)* For 12 VDC electro-mechanical counter
Counter (kh = 100 or kh = 1000)* For 12 VDC electro-mechanical counter
+12 VDC 12 VDC output; current rating is 3 mA max.
(MMS and MMD models only)
Table 2: I/O connections
*Recommend Leviton mechanical counter (1 kWh models), (0.1 kWh models), or equivalents
LED Indicators Description
Power LED (green) Illuminates when the meter is supplied with proper voltage
Load LED (green) 50% duty cycle (at constant load) LED to verify proper
meter function when connected to a load. At 200 watts,
LED will illuminate for 1.5 minutes, then turn off for 1.5
minutes; with no load, LED will remain on or off
Reverse Phase LED (red) Illuminates when a problem with meter phasing exists.
With no load, LED may be on or off. See CT installation
section for instructions.
LCD Display Optional LCD display that shows total kWh
Table 3: Display indicators