Installation Guide

ManualsBrandsLeviton ManualsElectricalHi-Fi 2 Expansion Amplifier Assembly with Power Supply

Introduction

This kit expands the Leviton Hi-Fi

2 Whole Home Audio Distribution System from an 8 Audio Zone system to a 16 Audio Zone system.

Features

• Adds 8 zones of audio ampliﬁcation

• Equipped with 2 variable outputs for additional ampliﬁcation

• Built-in universal power supply

• Volume-Source Control (VSC) keypads connect using Standard Category 5 Wiring

Includes

• Expansion Assembly with built-in power supply

• 8 Volume and Source-Control (VSC) keypads

• Power Cord

• Expansion Cable

• Manual

Installation

The Hi-Fi 2 Expansion Assembly houses the power supply and ampliﬁers for the additional 8 audio zones. It is also the termination point for zone speakers and Volume-Source

Control (VSC) keypads.

The Hi-Fi 2 Expansion Assembly can be installed in a Vented Enclosure (Leviton Part Number: 95A09-1) that can be tucked away in a closet or basement or can be installed in a

Leviton, OnQ, Channel Vision, Siemon, or other "open house" type structured wiring enclosure using an Leviton Universal Mounting Plate (Leviton Part Number: 20A07-2).

The Hi-Fi 2 Expansion Assembly must be mounted below the Hi-Fi 2 Main Assembly, within 6 inches. It should be mounted in a location that is protected from high humidity levels

and temperature extremes. An AC power outlet should be located within 5 feet.

Hi-Fi 2 Expander Inputs and Outputs

The Hi-Fi 2 Expander is equipped with the following inputs and outputs:

Page 2

1. Expander Connector

This connector is used to connect the Expansion Assembly to the Hi-Fi

Main Assembly.

2. Variable Output for Zone 9

This is a variable audio

output used for attaching additional

amplification to Zone 9.

3. Variable Output for Zone 16

This is a variable audio output used for attaching additional

amplification to Zone 16.

4. Zone Control / IR Inputs

These jacks are where Volume-Source Control (VSC) keypads are

connected using a network cable.

5. Power Supply Input This is where the supplied power cable connects to the power supply.

6. Speaker Connectors These terminals are where all zone speakers are connected.

WEB VERSION