Cut Sheet

ManualsBrandsLeviton Manuals& CordLEV CBL COAX NICK 12' BK

PRODUCT DATA

Renoir

™

II Architectural Wall Box Dimmers - Preset Slide

Renoir

™

II Architectural Wall Box Dimmers

Preset Slide – Standard Heat Sink

The Leviton Renoir

II line of architectural wall

box dimmers supports an unparalleled number of

applications using a minimum number of SKUs.

Renoir II high performance dimmers support all load

types and configurations.

Performance, aesthetics,

multi-location dimming

and multi-gang capabilities

make Renoir II a highly functional, yet elegant

solution for architectural dimming control.

FEATURES

• Universal voltage—20-277V (excludes

non-neutral models)

• Multi-location dimming—up to 5-way dimming

- Remote dimmers and switches

- Connect up to 5 devices, max 250’ on 1

traveler wire

- Remote control all connected master

dimmers

- Masters always operate independently

• Locator indicator—illuminates when dimmer is

off for easy location in a dark room

• Non-neutral models—for retrofit applications

• Configurable cut-off level—allows user

configuration of cut-off point and automatically

recalibrates to allow maximum control from

cutoff point to full output

• Smooth-action, linear captive slide control—

easy, precise adjustment of lighting levels

- Easy-touch preset switch turns lights ON a

last selected brightness level

• Clean and stylish appearance

- Fits standard commercial 2-1/2” deep wall

boxes*

- Decora

wallplates coordinate with Leviton’s

extensive line of Decora devices

- Fins are easily removed for multi-gang

applications

- No visible metal heat sinks, fins or mounting

hardware

• Solid state triac dimming—saves energy

when dimming, extends lamp life and reduces

maintenance costs

• Flicker-free, smooth, and continuous dimming

—reduces light fluctuations from line voltage

variation and maintains the power delivered to

the lamp

• Power failure memory—light is restored to

the same levels set prior to the power failure or

power interruption

• Surge protection—tested to withstand surges

of 6,000V, 200A (ANSI/IEEE Std. C62.41-1980)

• Electrostatic discharge protection—protects

dimmer against static discharge up to 16,000V

• Advanced technology engineered heat sinks

—transfers heat away from essential electrical

components for extended product life

• Square law dimming—slider position indicates

the perceived light level

• RFI filtering—reduces interference with radio,

audio and video equipment

• Accessible air gap feature—completely

disconnects power from the load when lights are

off for safety when changing lamps (available

on select models; consult factory for additional

details)

* Field configurable multi-gang boxes not supported

Leviton Mfg. Co., Inc. Lighting & Energy Solutions

201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les

Summary of content (4 pages)

PAGE 1
PRODUCT DATA ® Renoir™ II Architectural Wall Box Dimmers The Leviton RenoirTM II line of architectural wall box dimmers supports an unparalleled number of applications using a minimum number of SKUs. Renoir II high performance dimmers support all load types and configurations. Performance, aesthetics, multi-location dimming and multi-gang capabilities make Renoir II a highly functional, yet elegant solution for architectural dimming control.
PAGE 2
PRODUCT DATA DIMENSIONS A Renoir™ II Architectural Wall Box Dimmers - Preset Slide B E D C A B C D E Narrow Dimmer 1.72” (43.68mm) 5.15” (130.99mm) 2.89” (73.43mm) 0.53” (13.53mm) 1.60” (40.64mm) Wide Dimmer 1.72” (43.68mm) 5.15” (130.99mm) 4.70” (119.40mm) 0.53” (13.53mm) 1.60” (40.64mm) Switch 1.72” (43.68mm) 5.15” (130.99mm) 2.89” (73.43mm) 0.53” (13.53mm) 1.60” (40.64mm) Switch Remote 1.72” (43.68mm) 5.15” (130.99mm) 2.89” (73.43mm) 0.53” (13.53mm) 1.10” (28.
PAGE 3
® 120V Load Type Incandescent (No Neutral) Incandescent/ Magnetic Low Voltage Fluorescent 0-10V Mark 10® or Lutron 2-Wire Lutron 3-Wire Electronic Low Voltage 230V 277V Load LED Load Heat Sink Width CAT. NO.
PAGE 4
PRODUCT DATA ® ORDERING INFORMATION WALLPLATES ORDERING KEY Each device is supplied with a white, single gang plate. For purchase of replacement plates or plates in an alternate color, please consult the diagram below. For make-to-order plates, 4-6 week lead time is required.