Instructions / Assembly
3-Way Wiring - DDS15 Switch with DD0SR-DLZ Switching
Remote Application:
3-Way Wiring - DDMX1 Dimmer with DD00R-DLZ Dimming Remote
Application:
NOTE: Incandescent, Magnetic low voltage, LED/CFL, Mark X™ and
Tu-Wire™ fluorescent installations only.
PK-A3123-10-00-2A
TOOLS NEEDED TO INSTALL YOUR REMOTE
Slotted/Phillips Screwdriver Electrical Tape Pliers
Pencil Cutters Ruler
INSTALLING YOUR REMOTE
NOTE: Use check boxes when Steps are completed.
ONOFF
ONOFF
ONOFF
ONOFF
ONOFF
ONOFF
ONOFFONOFF
ONOFF
ONOFF
ONOFF
ONOFF
WARNING: TO AVOID FIRE, SHOCK OR DEATH; TURN
OFF POWER at circuit breaker or fuse and test that power
is off before wiring!
Step 1
INTRODUCTION
Decora
®
Digital Remotes are designed to provide multi-location control of Decora Digital
Dimmers and Switches. Decora
®
Digital Dimmers and Switches with Bluetooth
®
represent
the next generation of lighting control technology. This innovative device works using the
Leviton Decora
®
Digital Dimmer & Timer app that can be easily downloaded to smartphones
or tablets and paired to the Leviton Dimmer using Bluetooth
®
technology. Decora
®
Digital
Devices give users point-to-point local control to automate lighting, bridging the gap
between standard dimmers and whole-house automation systems.
The Decora
®
Digital Dimmer is a powerful device – combining the best of Leviton dimmer
and timer functions with today’s mobile technology for impressive results. The simple touch
of a finger following the intuitive on-screen guide makes it more convenient than ever to
manage lighting for home activities or to ensure a "lived-in" look while away. Plus, the
Decora
®
Digital Dimmer is Universal and compatible with LED, CFL or Incandescent bulbs.
The Decora
®
Digital Switch combines the functions of a standard wall switch and a
countdown or programmable timer switch in one attractive device.
Use of the app allows greater flexibility for accurate timer functionality and makes pushing
buttons for timed events a tedious chore of the past.
The Leviton Decora
®
Digital Dimmer & Timer app can be easily downloaded to mobile
devices and is compatible with Android and iOS smartphones or tablets. The app is easy
to use with simple, intuitive on-screen menu options to independently control dimmers and
switches throughout the home.
Decora
®
Digital Devices are ideal for living rooms, bedrooms, kitchens, dining rooms, home
offices, outdoor lighting or anywhere full control of lighting is desired.
• ON/OFF LED
• Three way communication
• Ease of installation – No new wiring
FEATURES
Side Wire Connection
Side wire terminals accept #14-12 AWG
solid copper wire only.
Back Wire Connection
Back wire openings accept #14-12 AWG
solid copper wire only.
Preparing and connecting wires:
This remote can be wired using side wire terminal screws or through
backwire openings.
Step 3
5/8"
(1.6 cm)
Strip Gage
(measure bare
wire here)
3-Way or More Applications (Multi-location)
Universal Matching Remotes (Dimming and Switching)
Cat. No. DD00R-DLZ - Matching Dimming Remote - 120/277VAC, 60Hz
Cat. No. DD0SR-DLZ - Matching Switching Remote - 120/277VAC, 60Hz
INSTALLATION INSTRUCTIONS
WARNINGS AND CAUTIONS:
• TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
• To be installed and/or used in accordance with electrical codes and regulations.
• If you are unsure about any part of these instructions, consult an electrician.
• Decora
®
Digital remotes are not compatible with standard 3-way or 4-way switches. They must be used with compatible Decora
®
Digital devices
for multi-location switching.
WARNINGS AND CAUTIONS:
• Use this device WITH COPPER OR COPPER CLAD WIRE ONLY.
• Use only one (1) Decora
®
Digital dimmer or switch in a multi-location circuit with up to 4 matching remotes.
NOTE: The remote(s) will turn the light on at the brightness level selected at the dimmer.
• Recommended minimum wall box depth for remotes is 2-1/2".
• Maximum wire length from switch to all installed remotes cannot exceed 300 ft (90 m).
6
5
4
1
2
3
2
5
4
3
1
4-Way
1. First Traveler (note color)
2. Second Traveler (note color)
3. Neutral
4. Ground
5. Third Traveler (note color)
6.
Fourth Traveler (note color)
NOTE: The first and third traveler
wires are used to carry line power
to the other switch boxes.
3-Way
1. Line or Load (Tagged)
2. Neutral
3. Ground
4. First Traveler (note color)
5. Second Traveler (note color)
NOTE: The first traveler wire is
used to carry line power to the
other switch box.
Identifying your wiring application
(most common):
NOTE: If the wiring in the wall box does not resemble
any of these configurations, consult an electrician.
Step 2
IMPORTANT:
For 3-Way applications, note that one of the screw terminals from the old switch being
removed will usually be a different color (Black) or labeled Common. Tag that wire with
electrical tape and identify as the common (Line or Load) in both the dimmer/switch wall
box and remote wall box.
For 4-Way applications, note that the old switch being removed will have 4 screws
plus a ground screw. Tag the two wires connected to the two back screw terminals.
Changing the color of your Remote:
Your remote may include color options. To change color of the face proceed as follows:
1
2
Insert top tabs
and press in
bottom tabs to
attach
Push in sides at
bottom tabs and
pull outward to
release
• Make sure that the ends of the wires from the wall box are straight (cut if necessary).
• Remove insulation from wires in the wall box as shown.
Cut
(if necessary)
Step 4a
N
OTE: The DDMX1 dimmer must be installed in a wall box that has a Load connection. The
DD00R-DLZ dimming remote must be installed in a wall box with a Line Hot connection and a
Neutral connection.
WIRING
DD00R-DLZ
DIMMING REMOTE
(wall box with Line Hot connection):
Connect wires per WIRING DIAGRAM as follows:
NOTE: Use backwire connection when connecting two wires to one screw terminal.
• Green or bare copper wire in wall box to Green terminal screw.
• Line Hot (common) wall box wire identified (tagged) when removing old switch and First
Traveler (note wire color) to remote terminal screw marked "BK".
• Second Traveler wall box wire to remote terminal screw marked "YL/RD" (note wire
color). This traveler from the remote must go to Yellow/Red dimmer lead.
• Neutral wall box wire to remote terminal screw marked "WH".
WIRING DDMX1 DIMMER (wall box with Load connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green dimmer lead.
• Load wall box wire identified (tagged) when removing old switch to the Red dimmer lead.
• First Traveler (color noted above) to the Black dimmer lead.
• Remove Red insulating label from the Yellow/Red dimmer lead.
• Second Traveler wall box wire (color noted above) to Yellow/Red dimmer lead. This
traveler from the dimmer must go to the terminal screw on the remote marked "YL/RD".
• Neutral wall box wire to White dimmer lead.
• Proceed to Step 5.
Hot (Black)
Neutral (White)
DDMX1 Dimmer
DD00R-DLZ
Dimming Remote
YL/RD
Red
Yellow/
Red
WH BK
Black
Black
White
Line
120VAC
60Hz
White
Load
Green
Ground
Green
Ground
DDMX1 Dimmer
White
Red
Green
Black
1
2
3
Yellow/Red
4
5
DD00R-DLZ
Dimming Remote
Neutral to Terminal
Screw marked
White (WH)
2
3
5
WH
BK
YL/RD
4
1
T
erminal
Screw
marked
Black
(BK)
T
erminal
Screw
marked
Yellow/
Red
(YL/RD)
Step 4b
NOTE: The DDS15 switch must be installed in a wall box that has a Load connection.
The DD0SR-DLZ switching remote must be installed in a wall box with a Line Hot
connection and a Neutral connection.
WIRING
DD0SR-DLZ
SWITCHING REMOTE
(wall box with Line Hot connection):
Connect wires per WIRING DIAGRAM as follows:
NOTE: "RD" terminal on switching remote is unused. Tighten screw.
NOTE: Use backwire connections when connecting two wires to one screw terminal.
• Green or bare copper wire in wall box to Green terminal screw.
• Line Hot (common) wall box wire identified (tagged) when removing old switch and
First Traveler (note wire color) to remote terminal screw marked "BK".
• Second Traveler wall box wire to remote terminal screw marked "YL/RD" (note wire
color). This traveler from the remote must go to the terminal screw on the switch
marked "YL/RD".
• Neutral wall box wire to remote terminal screw marked "WH".
WIRING DDS15 SWITCH (wall box with Load connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• Load wall box wire identified (tagged) when removing old switch to switch terminal
screw marked "RD".
• First Traveler (color noted above) to switch terminal screw marked "BK".
• Remove Red insulating label from terminal screw marked "YL/RD".
• Second Traveler wall box wire (color noted above) to switch terminal screw marked
"YL/RD". This traveler from the switch must go to the terminal screw on the remote
marked "YL/RD".
• Proceed to Step 5.
DDS15 Switch
DD0SR-DLZ
Switching Remote
Terminal
Screw
marked
Black
(BK)
Terminal
Screw marked
Red (RD)
Terminal
Screw marked
White (WH)
Terminal
Screw
marked
Yellow/
Red
(YL/RD)
2
3
5
Neutral to Terminal
Screw marked
White (WH)
2
3
5
WH
BK
YL/RD
WH
BK
RD
YL/RD
1
4
4
1
T
erminal
Screw
marked
Black
(BK)
T
erminal
Screw
marked
Yellow/
Red
(YL/RD)
Hot (Black)
Neutral (White)
Load
YL/RD
YL/RDRD
BK
Black
White
Line
120/277V
AC
60Hz
WH BK
WH
DD0SR-DLZ
Switching Remote DDS15 Switch
Green
Ground
Green
Ground