Specification

Typical Specifications
Operating Temperature Range - 0°C - 40°C
Storage Temperature Range - 10°C - 85°C
Relative Humidity - 0% - 98%
Agency Standards and Compliance
Bluetooth SIG Certification on Bluetooth models
Dimmer
Complies with UL 1472
FCC Listing Part 15 and Part 18
Switch
Complies with UL 917
CSA Certified to Standard 177
Title 24 Compliant
Fan Speed Control
Complies with UL 1917
CSA Certified to Standard 156
Warranty Information
Limited 5-year warranty
Installation Considerations
Note: Sharing a neutral wire may cause flickering. Connect all devices to
the same phase or run a separate neutral to each phase. Consult Leviton
Tech Line if problems persist.
Warning: To avoid fire, shock or death when retrofitting Mark 10
Powerline dimming ballasts into fixtures that originally had Instant Start
ballasts, the sockets MUST be replaced with Rapid Start sockets to allow
proper dimmer operation and prevent property damage, injury or death.
Refer to the instructions provided with the ballast and the Leviton dimmer.
DDL06, DDMX1 and DDE06: LED and CFL lamps marked or rated as
dimmable can be used with this dimmer. For a complete list of approved
LED lamps visit www.leviton.com/universal
Cat. No. Single 2-Gang 3-Gang or more
DDL06 600W Incandescent
300W LED/CFL
500W Incandescent
300W LED/CFL
500W Incandescent
300W LED/CFL
DDMX1 1000W Incandescent
1000VA MLV
1000VA Mark 10
450W LED/CFL
800W Incandescent
800VA MLV
1000VA Mark 10
450W LED/CFL
700W Incandescent
700VA MLV
1000VA Mark 10
450W LED/CFL
DDE06 600W Incandescent
600W ELV
300W LED/CFL
500W Incandescent
500W ELV
300W LED/CFL
400W Incandescent
400W ELV
300W LED/CFL
DD710 (120V) 950VA (8A) 950VA (8A) 950VA (8A)
DD710 (277V) 1350VA (5A) 1350VA (5A) 1350VA (5A)
DDF01 1.5A 1.5A 1.5A
Maximum Load For Multi-Gang Applications
In multi-gang applications de-rating may be required in accordance with the following chart.
Dimensional Drawings
DDL06 (shown), DDS15
3.28
83.34
3.81
96.82
4.13
104.90
2.12
53.95
1.43
36.42
2.74
69.70
0.35
8.80
0.25
6.24
DDMX1
1.75
44.45
4.13
104.90
3.81
96.82
3.28
83.34
2.74
69.68
1.40
35.55
0.35
8.80
0.25
6.25
DDE06, DD710, DDF01
4.13 104.9
3.81 96.8 3.28 83.3
1.75 44.5
1.29 32.7
2.61 66.2
1.42 36.1
2.74 69.7
.32 8.1
.42 10.7
Use Leviton Power Extenders to extend the load capacity of box mounted
dimmers. Leviton Power Extenders are available for incandescent, magnetic
low voltage, electronic low voltage, Mark 10 Powerline fluorescent dimming
ballasts or equivalents and 0-10 VDC dimmable fluorescent ballasts such as
Mark 7 0-10V, OSRAM Sylvania Quicktronic
®
Helios™ or equivalent ballasts.