Product Brochure

DSL06 DSM10 DSF01 DSE06 DS710 DSX10 DSX12 DSH08-1 DSH06-7
Voltage, Frequency
120VAC-60Hz Yes Yes Yes Yes Yes Yes - Yes -
277VAC-60Hz - - - - Yes - Yes - Yes
Load Rating
Incandescent/ Halogen 600W 1000W - - - - - - -
LED/CFL 300W 450W - 300W - - - - -
M LV - 1000VA - - - - - - -
E LV - - - 600VA - - - - -
Fluorescent - - - -
1200VA
1500VA
1000VA 1200VA 8A 6A
Motor - - 1.5A - - - - - -
Mechanical
Neutral Required No No No Yes No No No Yes Yes
Single Pole/3-Way Yes Yes Yes Yes Yes Yes Yes Yes Yes
Locator Light Yes Yes No No No No No No No
SPECIFICATIONS AT-A-GLANCE
FEATURES AND BENEFITS
New design with rocker switch and slender dimmer
control slide bar
Integrated linear full-range slide control for easy,
precise operation
Separate ON/OFF switch that preserves the selected
brightness setting
Provides single pole (one location) or 3-way (two location)
lighting control when paired with a 3-way switch
Comes packaged in White with Ivory and Light Almond
color change kits
Additional color change kits available in Black, Brown,
Red and Gray
Slim, compact housing fits easily into a standard wallbox
Suitable for multi-gang installations with other
Decora products
No fins for multi-gang installation
Built-in radio/TV interference filter
LED/CFL/Incandescent/Halogen Dimmers
DSL06 and DSM10 designed for optimal control of dimmable
LED and CFL lamps
DSM10 also compatible with Magnetic Low Voltage lamps
Microprocessor control oers flexibility to fine-tune LEDs and CFLs
for best performance (DSL06 and DSM10)
Setting available for ensuring start up for CFL lamps
Wider dimming range on LED and CFL lamps than conventional
incandescent dimmers
Optional programming feature allows users to modify the dimming
range to optimize low light level performance when required
Locator light can be enabled or disabled
0-10V LED/Mark 7
®
Fluorescent Dimmer
DS710 designed for use with LED fixtures using 0-10V
power supplies
Dual voltage 120V/277V
No power pack required for switching
50ma 0-10V “Sinking” current available
Quiet Fan Speed Control
1.5 Amps of quiet fan speed control
Combines a Decora rocker ON/OFF switch with a contemporary
slender slide bar for the selection of low, medium or high fan speeds
Ideal for libraries, home oces, bedrooms and any area where
ceiling fan noise could become distracting
TYPICAL SPECIFICATIONS
Operating Temperature Range - 0°C to 55°C
Storage Temperature Range - -10°C to 85°C
Relative Humidity – 20% to 90% Non-Condensing
AGENCY STANDARDS AND COMPLIANCE
Dimmers
cCSAus Certified to Standard 184.1
Complies with UL 1472
NOM
Fan Speed Control
cCSAus Certified to C22.2 No. 156
Complies with UL 1917
NOM
INSTALLATION CONSIDERATIONS
Note: Sharing a neutral wire may cause flickering. Connect all devices
to the same phase or run a separate neutral to each phase. Consult
Leviton Tech Line if problems persist.
Warning: To avoid fire, shock or death when retrofitting Mark 10
Powerline dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid Start sockets
to allow proper dimmer operation and prevent property damage, injury
or death. Refer to the instructions provided with the ballast and the
Leviton dimmer.
DSL06 and DSM10: LED and CFL lamps marked or rated as dimmable
can be used with this dimmer. For a complete list of approved LED and
CFL lamps visit www.leviton.com/universal
Use Leviton Power Extenders to extend the load capacity of box mounted
dimmers. Leviton Power Extenders are available for incandescent, magnetic low
voltage, electronic low voltage, Mark 10 Powerline fluorescent dimming ballasts
or equivalents and 0-10 VDC dimmable fluorescent ballasts such as Mark 7
0-10V, OSRAM Sylvania Quicktronic
®
Helios™ or equivalent ballasts.
WARRANTY INFORMATION
Five-Year Limited Warranty