Product Overview

AGENCY STANDARDS AND COMPLIANCE
■ UL Listed (File #E-31373)
■ CSA Certified (File #LR-3413)
Leviton Mfg. Co., Inc.
201 North Service Road, Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: [phone] www.leviton.com
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
DIMENSIONAL DRAWINGS
INSTALLATION CONSIDERATIONS
IllumaTech™ Preset Slide & Rotary Controls
Note: Sharing a neutral wire may cause flickering. Connect all
devices to the same phase or run a separate neutral to each
phase. Consult Leviton Techline if problems persist.
Caution on Retrofits: When retrofitting Mark 10
®
Powerline
dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid
Start sockets to allow proper dimmer operation and prevent
damage to the dimming ballast. Refer to the instructions
provided with the ballast and the Leviton dimmer.
IllumaTech Rotary Controls
3.28
(83.34)
2.23
(56.64)
4.12
(104.64)
1.73
(
44.04)
0.75
(
19.05)
1.30
(
33.12)
IllumaTech Dual Controls
O
F
F
M
A
X
H
I
M
E
D
L
O
3.28
(83.34)
2.67
(67.81)
4.12
(104.64)
1
.73
(44.04)
0
.75
(19.05)
1
.30
(33.12)
Color Change Kit for IllumaTech Slide Controls
(Preset Kit Shown)
Frame
Strap
Snaps
Push in 2
L
ocations
ON/OFF
LED
Slider
IllumaTech Preset Slide Controls
2.68 (68.1)
1
.41
(
35.8)
4.15 (105.4)
3.28 (83.3)
2
.12 (53.8)
0.38 (9.7)
Use Leviton Power Extenders to extend the load capacity of
box mounted dimmers. Leviton Power Extenders are available
for incandescent, magnetic low voltage, electronic low
voltage, Mark 10
®
Powerline fluorescent dimming ballasts or
equivalents and 0-10 VDC dimmable fluorescent ballasts such
as Mark 7
®
0-10V, OSRAM Sylvania Quicktronic
®
Helios™ or
equivalent ballasts.