Full Product Manual

5
Additional related product options available @ www.leviton.com
Specifications
AC Horsepower Rating
At Rated Voltage 1 HP
Electrical Specifications
Grounding
Self-Grounding Clip
(Isolated Ground Model Separates
Ground Terminal from Ground Strap)
Pole 2
Wire 3
Short Circuit Current Rating 10kA
Environmental Specifications
Flammability Rated V-0 per UL94
Operating Temperature -35°C to +66°C
Material Specifications
Face Material PBT
Body Material Polycarbonate
Terminal Screws Plated Steel
Terminal Screws (WR Only) Stainless Steel
Terminal Clamp Brass
Line Contacts Brass
Grounding Screws Plated Steel
Grounding Screws (WR Only) Stainless Steel
Strap Material Galvanized Steel
Strap Material (WR Only) Nickel Plated Steel
Ground Clip Brass
Shutter Mechanism (TR Only) Acetal
Mechanical Specifications
Terminal ID Brass-Hot, Green-Ground, Silver-Neutral
Terminal ID – WR Only Black-Hot, Green-Ground, Silver-Neutral
Lead ID (Leaded Only) Black-Hot, White -Neutral, Green-Ground
Terminal Accom. #14-#10 AWG Solid or Stranded
Termination
Back & side wiring, external wire clamps
(2 wires/terminal)
Wire Leads (Leaded Only)
6” long #12 AWG TEW line & load leads
plus ground lead
Product ID Ratings are permanently marked on device
Standards & Certifications
NEMA WD-1 & WD-6
ANSI C-73
Certification/Listing UL, CSA, NOM-ANCE
Applicable Standards
UL 943, UL 498, CSA C22.2
No. 42 & 144, FedSpec W-C-596
Warranty
Product Warranty 2 Year Limited
Typical for GFNT2-HG
1.36 (34.5mm)
1.11
(28.2mm)
.05 (1.3mm)
1.74 (44.2mm)
1.31 (33.3mm)
3.81 (96.8mm)
3.27 (83.1mm)
2.80 (71.1mm)
4.05 (102.9mm)
Additional Features & Benefits
Weather-Resistant:
n Designed for wet and damp locations to meet the
requirements of NEC
®
Section 406.8
n Nickel Plated steel strap and stainless steel screws
n Conformal coated PC board to protect critical
components from moisture
n Cold impact resistance
n UV stabilized plastics
NAFTA Compliant:
n Suitable for installation where compliance
with the Buy American Act is desirable
Isolated Ground:
n Isolated ground receptacles isolate the strap/ground
lead to reduce electrical noise interference to
sensitive electronic equipment
n Isolated ground terminal pre-wired with #12 AWG
stranded wire for quick assembly
Leaded:
n Includes 6" long #12 AWG TEW line & load leads plus
a ground wire to significantly reduce installation
times
Pilot Light:
n Ideal for equipment protection on dedicated
branch circuits
n High-visibility LED provides a visual indication of
power status - ideal for applications where
receptacles are not easily accessible