Installation Guide

Page 12
To raise lighting levels:
Press and hold the increase button of the zone desired. The 400cp will then take control
of all dimmer channels assigned to the selected zone and increase lighting levels at the
programmed fade rate. Release button when correct lighting levels are attained.
To lower lighting levels:
Press and hold the decrease button of the zone desired. The 400cp will then take control
of all dimmer channels assigned to the selected zone and decrease lighting levels at the
programmed fade rate. Release button when correct lighting levels are attained.
To restore control from a console:
Simply perform a change in the channel level from the console. The lighting channel will then
fade back to the new console level at the same fade rate as last commanded by the 400CP for
that channel. Once the console level matches or is moved past the lighting level, full console
control will be resumed for that channel.
Operation
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is
free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton’s only obligation is to
correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes
and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or
in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or
not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness
for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including
merchantability and fitness for a particular purpose, is limited to two years. Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this
warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd
to the attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800
405-5320.
TERMINATION
JUMPER
PROGRAM
JUMPER
ID NUMBER
DIP-SWITCH
TERMINAL
BLOCK
LO+
LO-
+VDC
COM
REM-
REM+
REAR VIEW OF 400CP
UNIT WITH DIP SWITCH
PROGRAM
JUMPER
TERMINAL
BLOCK
LO+
LO-
+VDC
COM
REM-
REM+
UNIT WITHOUT DIP SWITCH
DI-000-N0400-00F© 2016 Leviton Mfg. Co., Inc.
WEB VERSION