Specification

PRODUCT DATA
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: [phone] www.leviton.com/les
© 2013 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
ODC Series Multi-Technology Occupancy Sensors
ODC Series Multi-Technology (M/T)
Occupancy Sensors
DESCRIPTION
The Leviton ODC Series combines line voltage
occupancy sensors and photocells into a self-
contained unit. The integrated design alleviates
the need for separate power pack and occupancy
sensor wiring making it a low-cost, efficient
energy solution for new construction and
retrofits. For true Daylight Harvesting applications,
integrated photocells provide consistent Daylight
Design Levels by actively switching the connected
load(s) ON and OFF in response to available
natural light to maximize energy savings. Vacancy
timers continually analyze and adjust to changing
conditions using the latest microprocessor-based
technology to optimize performance. Auto ON/
Auto OFF automatically turns lights ON and
keeps them ON when occupancy is detected and
automatically turns lights OFF when the space
is vacant or unoccupied. Wire terminals allow for
simple connection to a line-voltage circuit and are
ideal for existing buildings with limited access to
wiring and new construction.
APPLICATIONS
• Daylight Harvesting
• CA Title 20 Compliant Occupancy Sensor
• Auto-ON/Auto-OFF
• Manual-ON/Auto-OFF
FEATURES
• Sensors combine both PIR and U/S technology
for unrivaled performance and reliability. Sensors
use PIR technology to initially turn lights ON, and
use U/S technology to keep the lights ON.
Exclusive false-detection software assures
lights are ON only when needed.
• Auto-Adapting: Time delay and sensitivity are
continually adjusted to occupancy pattern of
use
• Configurable for Manual ON/Auto OFF or Auto
ON/Auto OFF
• Vacancy Sensing Time Outs:
• Delayed OFF Timer: The sensor will turn lights
OFF if no motion is detected after a specified
time
• Exclusive Walk-through Feature: Provides
increased energy savings by not leaving the
lights ON for an extended period after only
momentary occupancy
• False Detection Timer: (M/T) The PIR scans for
movement and shuts lights off after 31
minutes preventing false triggers from HVAC
systems
• Time delay and saved settings are protected
during power outages and will return to the
last known state
• Output short circuit protection
• Industry-exclusive self-configuring local
manual switch input: Momentary or
maintained switches are supported
• Presentation Mode feature for slide or film
presentations allows push buttons to turn
lights OFF and keep them OFF while the room is
occupied
• Adjustable Time Delay: 30s, 5min, 10min,
20min, 30min
• Test Mode for simplified commissioning
• Manual Switch and Emergency Override are
Class 1 and Class 2 circuits. Class 2 circuits
provided for flexibility
• Industry-exclusive “fail-safe” circuitry: In the
event of product failure, Return-to-Closed
feature causes the relay to default ON which
eliminates life safety concerns
Light Pipe