Specification

PRODUCT DATA
ODS10
FEATURES
• Fits in standard wallbox and replaces single-pole
wall switch. Gangable with other units.
• Low-profile design eliminates obtrusive
“scanning-device” look. Elegant Decora wallplates
complement any interior for sleek aesthetics; uses
Decora wallplates and coordinates with Leviton’s
popular line of Decora wiring devices.
• 180° field-of-view provides approximately 2,100
square feet of coverage suitable for small offices,
conference rooms, classrooms, lounges and a
variety of commercial areas
• Convenient pushbutton provides manual-ON/OFF
light switching at any time
• Two dual element PIR sensors used to widen
detection range
• Segmented Fresnel lens provides optimum
sensitivity and performance. Designed with an
extensive “minor motion” area where even slight
body movements will be detected.
• Vandal resistant PIR lens
• Blinders—horizontal field-of-view may be adjusted
between 180° and 60° of arc by using integral
blinders located on either side of the lens, no
masking tape required
• Manual-ON/auto-OFF mode for installations where
manual-ON switching is required but auto-OFF
switching is still desired for Title 20 energy
savings
• To comply with CA Title 20, a red LED indicator
light flashes when sensor detects motion to verify
detection is active
• Time Delay adjustment for delayed-OFF time
settings of 30 seconds (for walking test), 10
minutes, 20 minutes and 30 minutes. Allows
customized adjustments to maximize energy
savings.
• Light Sensor Adjustable Ambient Light Override
ranges from approximately 2FC (20LUX) to 500+
FC (5,000+ LUX) to prevent lights from turning ON
automatically during periods of ample natural light,
increasing energy savings
• Light sensor enables the load hold-OFF feature
once level has been set
• False detection circuitry
• Presentation Mode feature for slide or film
presentations allows push buttons to turn lights
OFF and keep them OFF while the room is occupied
• One unit can be used for 120V through 277V
lighting. Compatible with both electronic and
magnetic ballasts.
• Relay switches at the zero crossing point of the AC
power curve to ensure maximum contact life and
compatibility with electronic ballasts
• Exclusive Leviton High Inrush Stability (H.I.S.)
Circuitry—specifically designed to handle today’s
high inrush electronic ballast loads and offer
unmatched durability and service
• The no neutral design is optimal for retrofit
applications
ODS10-ID
Field-of-View (in feet)
FIELD-OF-VIEW
The ODS10-ID provides a 180° field-of-view with a
maximum coverage area of approximately 2,100
square feet. The maximum sensing distance in front
of the sensor is 40 feet, and at each side is 30 feet.
A “minor motion” zone detects relatively small body
movements and allows the lights to stay ON even
though a person may not be moving or walking
around the room. The remainder of the field-of-view,
the “major motion” zone, exhibits a lesser degree of
sensitivity and requires larger movements.
TOP VIEW
SIDE VIEW
15 40
0
0
15
15
30
30
40
40
4
Minor Motion, IR
Major Motion, IR
5
0