Specification

ManualsBrandsLeviton ManualsAccessoriesPower Base Adapter Converts any Low-Voltage Ceiling Sensor to Line-Voltage

PRODUCT DATA

Convert any Leviton low-voltage sensor to line voltage.

Leviton Mfg. Co., Inc. Lighting & Energy Solutions

20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 www.leviton.com/les

OPB15 Power Base Adaptor

Power Base Adaptor

DESCRIPTION

Leviton’s OPB15-0DW is a self-contained trans-

former and relay adaptor with a patent-pending

technology that converts any Leviton low-voltage

ceiling or wall sensor to line voltage. The OPB15-

0DW conveniently mounts to a standard 2.125”

deep x 4” octagon, 2.125” deep x 4” square elec-

trical box with mud ring, or to 4” surface mount

wire raceway boxes. It provides wire leads for

simple connection to a line-voltage circuit and a

two-part terminal block for fast, easy low-volt-

age connections to the sensor. The Power Base

Adaptor is ideal for both existing buildings with

limited access to wiring and new construction

with line-voltage circuiting only.

The OPB15-0DW offers the same performance

features as Leviton’s OSP Power Pack Series. By

providing the flexibility to install Leviton’s full line

of low-voltage sensors in any application, the

Power Base Adaptor is a “problem solver” that

increases the versatility of Leviton’s low-voltage

ceiling occupancy sensors.

Use the OPBCA Cosmetic Adaptor for surface

mount wire raceway boxes or to cover any wall-

board cuts for a professional finish to all projects.

APPLICATIONS

• Lavatories

• Remodels in hard ceiling spaces

• Energy conservation retrofits

• Any installation with limited access for

low-voltage wiring installation

• Surface mount boxes

FEATURES & BENEFITS

• Ability to convert Leviton low-voltage ceiling

sensors to line-voltage offers greater versatil-

ity in any application

• Streamlined installation offers customers an

immediate energy-management solution

• Mounts easily in electrical box and provides

leads for simple line voltage connection

• Two-piece terminal block provides fast, easy

low-voltage connections to the sensor

• Zero-crossing circuitry for enhanced reliability

and long-life operation

• Patented

PROBLEM:

Hard ceilings with limited access for

low-voltage wiring installations

SOLUTION:

Leviton’s Power Base Adaptor

Summary of content (2 pages)

PAGE 1
PRODUCT data Power Base Adaptor Problem: Hard ceilings with limited access for low-voltage wiring installations Solution: Leviton’s Power Base Adaptor Description Leviton’s OPB15-0DW is a self-contained transformer and relay adaptor with a patent-pending technology that converts any Leviton low-voltage ceiling or wall sensor to line voltage. The OPB150DW conveniently mounts to a standard 2.125” deep x 4” octagon, 2.
PAGE 2
product BULLETIN OPB15 Power Base Adaptor Specifications Electrical Input Voltage Output Voltage 120-277 VAC @ 50/60Hz 24 VDC, 40mA nominal, full-wave rectified and filtered, unregulated.(Each Leviton sensor contains an internal voltage regulator.) Load Rating 15A Incandescent, Electronic or Magnetic Fluorescent Ballast; 3/4 HP at 120V Wire Designation Line-Black, Load-Blue, White-Neutral Power Consumption Lights On: 120V - 1.58W, 277V - 2.34W (base only) Lights Off: 120V - .27W, 277V - 1.