Specification

PRODUCT DATA
PIR Fixture Mount High-Bay Sensor
with Integrated Light Sensor and
Two Interchangeable Lenses
Available as a dual relay, alternating relay, demand response, low voltage or
cold storage model
OSFHP • OSFHD • HB011
OSFHP-IxW
OSFHD-xTW
with Dual Relay
OSFHD-xAW with
Alternating Relay
FEATURES
• Integrated rotating adjustable light sensor for light
hold-off
• 24 hour auto-calibration for set-it and forget-it
• Dual relays for bi-level control
• Alternating relay software for increased lamp life
• Interchangeable 360° high bay and low bay lenses
included
• Adjustable time delay (no power required)
• 42” pre-stripped color-coded wire leads
• Quicksnap feature for easy installation
• H.I.S. (High Inrush Stability) Technology
- Zero crossing circuitry
- Robust mechanical latching relay
• Non-volatile memory, device returns to its last state
during power interruption
• LED indicator light blinks when sensor detects
motion, visible from long distance
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tech line 800-824-3005 fax [phone]
©2017 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
BASIC OPERATION
Whether factory or field installed, new installation or
retrofit, Leviton fixture mounted sensors provide fast,
easy installation and immediate energy savings by
automatically activating lighting only during periods of
occupancy. Reliable passive infrared (PIR) technology
detects occupancy, and the variable time delay—up
to 30 minutes—is user accessible without power,
tools or disassembly, and allows the ideal setting
based on application needs. Included with the sensor
are lenses for high-bay and low-bay, allowing one
unit to cover a variety of applications. The innovative
Autocal feature performs an automatic daylight
level calibration. Once calibrated, the sensor requires
no further adjustment and immediately enters
daylighting mode, actively switching the connected
fixture load ON and OFF in response to occupancy
and available natural light maximizing energy savings
through efficient light harvesting.
• The OSFHP includes an active daylight sensor and
controls a single load (also available in a 24V Low
Voltage Model)
• The OSFHD features dual relays with independent time
delay circuits, in addition to active daylight sensor
• The OSFHD-xAW features dual alternating relays
(daylight sensor not included on these models), to
maintain optimal lamp life in fixtures designed to
keep a portion of the lamps on at all times
• The HB011 features daylighting and demand
response and includes a single relay for 0-10VDC
sinking for direct connection to low voltage control
ballast
• Cold storage and 480V models are available
(OSFHP/OSFHD)
INSTALLATION
The OSFHP, OSFHD and HB011 installs directly to an
industrial fluorescent fixture or an electrical junction
box through a standard 1/2” knockout using the
provided lock-nut. Wiring is connected inside the
fixture body. For deep body fixtures, the OSFLO
or OSFOA accessory installs into the fixture 1/2”
knockout using the provided lock-nut. The OSFHP,
OSFHD and HB011 sensors are installed in one of
three, 1/2” punch-outs positioning the OSFHU at
the correct field-of-view position flush or below the
fixture reflector assembly. Wiring is routed through
the OSFLO or OSFOA to the fixture body for wiring.