Specification

PRODUCT DATA
OSFHP • OSFHD • HB011
FIELD-OF-VIEW
9.1m (30 ft)
9.1m
(30 ft)
9.1m
(30 ft)
9.1m (30 ft)
9.1m (30 ft)
12.2m (40 ft)
6.1m (20 ft)
6.1m
(20 ft)
6.1m
(20 ft )
6.1m (20 ft)
6.1m (20 ft)
3m (10 ft)
3m (10 ft)
3m
(10 ft)
3m
(10 ft)
0
0
0
9.1m (30 ft)
9.1m (30 ft)
6.1m (20 ft)
6.1m (20 ft)
3.0m (10 ft)
3.0m (10 ft)
0
9.1m
(30 ft)
9.1m
(30 ft)
6.1m (20 ft)
7.6m (25 ft)
6.1m
(20 ft)
6.1m
(20 ft)
2.4m (8 ft)
3.0m
(10 ft)
3.0m
(10 ft)
0
0
High-Bay
360°
Top View
Side View
Low-Bay
360°
Top View
Side View
FEATURES
• Rotating light sensor: optimal for best performance in
locating light measurements (up, down and side lighting)
• Auto calibration: set to auto-calibration, light sensor
measures lowest light level of facility with all lights ON
for 24 hours to determine the Daylighting Set Point
• Manual calibration: optimize energy savings and
operation by manually configuring the Daylighting Set
Point
• Performance daylighting: enhanced design algorithms
to assure lights will not cycle during cloud cover, or
varying light levels. (No more daylight = load will turn OFF
in +/- 5 minutes, Daylight returns = load will turn ON +/-
1 minute).
• Fast and simple setting: the OSFHP, OSFHD and HB011
do not require power to set the time delay saving
valuable time during installation
- Load 1 = 30s-30m
- Load 2 = 30s-infinity (starts after load 1 expires)
• Fast and simple testing: the OSFHP and OSFHD will
“instant ON” within 5 seconds. Upon initial power, relay is
closed enabling labor savings testing in seconds.
• Power interruption state: for energy savings and safety,
if power is lost to device, it will return to last known state
• Fast, simple installation: the OSFHP, OSFHD and
HB011 sensors easily installs on individual fixtures using
standard 1/2” knockouts and the quicksnap feature
which eliminates the time to tighten the lock-nut. The
42” wire leads reduce time and materials for connecting
the ballast. Simply make the electrical connections
inside the ballast compartment, install the appropriate
adjustable lens assembly included, and the sensor is
ready. Ideal for use in warehouses, manufacturing, cold
storage and other high ceilings.
• Zero crossing circuitry: relay uses a zero crossing
circuitry to provide reliable, long-life operation
• Range and coverage: the 360° high-bay PIR lens
provides a 2:1 spacing to mounting height coverage
under 25 ft. mounting and a 1.5:1 for heights up to 40
ft. mounting. The 360° low-bay lens provides 2:1 spacing
to mounting height coverage for 8 ft. to 20 ft. mounting.
• LED: super bright green LED indicates occupancy
detection and can be seen at 40 feet
• False detection protection: Energy saving technology
is designed into the OSFHP and OSFHD to assure your
lights are on only when needed