Product Overview

PRODUCT DATA
NightLight High LevelNightLight Off
OSS10
Decora
®
Wall Switch PIR Vacancy
Sensor with LED NightLight
BASIC OPERATION
The Decora
®
Wall Switch Passive Infrared (PIR)
Vacancy Sensor with LED NightLight (OSS10)
uses a PIR vacancy sensor to detect motion
from a heat-emitting source within its field-of-
view to automatically switch lights OFF , offering
the same performance features as the ODS
family of occupancy sensors. OSS10 has the
ability to reduce (dim) and turn off the “Guide
Light” function with a simple dial setting. The
LED NightLight consumes less than 1/2 W
providing energy savings and guide lighting
when room lights are off.
APPLICATIONS
The OSS10 is perfect for use in hospitality and
health care facilities with night light feature
to guide to manual-ON. The adjustable time
delay settings of 30 seconds to 30 minutes will
automatically turn lights OFF.
The OSS10 can be used to provide automatic
lighting control for energy savings and
convenience in a variety of commercial
applications, including:
• Hotel & hospital restrooms
• Conference rooms • Classrooms
• Small offices • Lounges
• Storage areas • Bathrooms
FEATURES
• Fits in standard wallbox and replaces single-pole
wall switch; ground and neutral connection required.
Gangable with other units.
• Low-profile design eliminates obtrusive “scanning-
device” look. Elegant Decora wallplates complement
any interior for sleek aesthetics; uses Decora
wallplates and coordinates with Leviton’s popular line
of Decora wiring devices.
• 180° field-of-view provides approximately 2100 SF of
coverage
• Convenient pushbutton provides manual-ON/OFF
light switching at any time
• Two dual element PIR sensors used to widen
detection range and double the detection points
within the FOV
• Segmented Fresnel lens provides optimum sensitivity
and performance. Designed with an extensive “minor
motion” area where even slight body movements will
be detected.
• Vandal resistant PIR lens
LED
READY™
OPTIMAL LED DESIGN
Exclusive LED High Inrush Stability
(H.I.S.) circuitry designed to handle the
high inrush electronic ballast loads of
today’s LED lighting and offer unmatched
durability and service. Our true Zero-Cross
Relay switches are at the zero crossing
point of the AC power curve, ensuring
maximum contactor life and compatibility
with LED ballasts. Leviton Occupancy and
Vacancy Sensors are the premiere choice
for LED compatibility.
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tech line 800-824-3005 fax [phone]
©2017 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.