Cut Sheet

ManualsBrandsLeviton ManualsDual Relay Occupancy SensorsLEV M/T OCC SNSR 2P NTRL

PRODUCT DATA

OSSMD

Dual Relay Decora

Wall Switch

Multi-Technology Occupancy Sensors

BASIC OPERATION

Passive Infrared (PIR) technology is used to

detect motion and turn lights ON, while either

technology is used to keep lights ON while

occupied. This allows the Ultrasonic (U/S) to

be set to higher sensitivity levels minimizing

false OFF conditions. The PIR portion gives

immunity to false ON through a specialized

lens that divides the field-of-view into sensor

zones. When a person passes into or out of a

sensor zone, the sensor detects motion and

switches the primary lighting load ON while the

secondary relay operates in manual-ON/auto-

OFF (MD/GD models). With the FT models, both

relays operate in auto-ON/auto-OFF. The lights

will remain ON as long as there is an occupant

moving through

the sensor zones. The U/S

sensors give maximum

sensitivity and range in

difficult spaces with irregular shaped rooms and

partitions that can block the PIR field-of-view.

The OSSMD also features the ability to turn off

PIR or U/S to become a single tech device.

APPLICATIONS

• Private and Executive offices

• Conference rooms • Daylight harvesting

• Classrooms • Restrooms

• Storage areas • Training areas

• Multimedia rooms • Day care centers

• Lounges • Retrofits

• Bi-level or A/B switching

• Multi-location switching (similar to 3-way)

HOW THE OSSMD AUTOMATICALLY ADAPTS

CONDITION EXAMPLE ADAPTIVE REACTION

False-On:

Sensor

incorrectly

turns the

lights ON

False-Off:

Sensor

incorrectly

turns the

lights OFF

After an initial movement

is sensed, if another

movement is not sensed

within the timer setting the

delayed off-time setting is

automatically reduced

If motion is detected

shortly after the lights go

off, the current delayed

off-time setting is

increased

The sensor detects

movement in the

corridor or hallway

and the room light

turns ON

The sensor

does not detect

movement because

an occupant is

virtually motionless

and the lights turn

OFF

The OSSMD provides automatic lighting control

for two

separate loads from a single unit. It is

compatible

with incandescent, fluorescent, low-

voltage lighting and fan loads. The unit features

dual manual-override switches that can be used

to toggle the ON/OFF status of each lighting

load while an area is occupied. The OSSMD

can be

installed in place of two single-pole wall

switches

and fits in a standard single-gang wall

box. The second relay is manual-ON only and

complies with California Title 20/24.

Leviton Manufacturing Co., Inc. Global Headquarters

201 North Service Road, Melville, NY 11747-3138 tech line 800-824-3005 fax 800-832-9538

Summary of content (4 pages)

PAGE 1
PRODUCT DATA BASIC OPERATION Passive Infrared (PIR) technology is used to detect motion and turn lights ON, while either technology is used to keep lights ON while occupied. This allows the Ultrasonic (U/S) to be set to higher sensitivity levels minimizing false OFF conditions. The PIR portion gives immunity to false ON through a specialized lens that divides the field-of-view into sensor zones.
PAGE 2
OSSMD PRODUCT DATA FEATURES • Provides automatic lighting control for two separate banks of fluorescent, incandescent or low-voltage lighting from a single unit • The second relay is a manual-ON only with a maximum 30 minute time-out for maximum energy savings and complies with California Title 20/24 • Fits in a standard single-gang wall box and replaces two single-pole wall-switches for fast and easy installation; neutral and ground connection required for OSSMD-MD.
PAGE 3
FIELD-OF-VIEW The OSSMD provides a 180° field-of-view with a maximum coverage area of approximately 2,400 square feet. The maximum major motion sensing distance in front of the sensor is 40 feet, and side to side is 30 feet. The “minor-motion” zone detects relatively small body movements and allows the lights to stay ON even though a person may not be moving or walking around the room. This zone is approximately 40 feet by 20 feet.
PAGE 4
PRODUCT DATA SPECIFICATIONS DIMENSIONAL DIAGRAMS ELECTRICAL Line Voltage 120-230-277 VAC -MD 120V 210mW 277V 410mW Power Consumption Operational Frequency U/S Operating Frequency Load Rating 2.06” (66.2mm) Secondary Relay: No. 16 AWG isolated contact leads: (2) Red BOTTOM Secondary Relay: Fluorescent: 800VA @ 120V 1200VA @ 277V Incandescent: 800W @ 120V Motor: 1/4 HP Mounting Yoke Vandal Resistant PIR Lens 32-104°F (0-40° (34.4 C)1.35mm) 4.06 (103.