Specification
PRODUCT DATA
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSSNL
Decora
®
Wall Switch PIR Occupancy
Sensor with LED NightLight
BASIC OPERATION
The passive infrared (PIR) sensor detects motion
from a heat-emitting source within its field-of-
view to automatically switch lights ON and OFF
,
offering the
same performance features as the
ODS family of occupancy sensors. OSSNL has the
ability
to reduce (dim) and turn off the “Guide
Light” function with a simple dial setting. The LED
NightLight consumes less than 1/2 W providing
energy savings and guide lighting when room
lights are off.
APPLICATIONS
OSSNL is perfect for use in hospitality and health
care facilities with either auto-ON or manual-ON
settings with adjustable time delay settings of 30
seconds to 2 hours.
The NightLight Occupancy Sensor Wall Switch
can
be used to provide automatic lighting con-
trol for energy savings
and convenience in a
variety of commercial applications, including:
• Hotel restrooms • Hospital restrooms
• Conference rooms • Classrooms
• Small offices • Lounges
• Storage areas • Bathrooms
NightLight High LevelNightLight Off
FEATURES
• Fits in standard wallbox and replaces single-pole
wall switch; ground and neutral connection required.
Gangable with other units.
• Low-profile design eliminates obtrusive “scanning-
device” look. Elegant Decora wallplates complement
any interior for sleek aesthetics; uses Decora wall-
plates and coordinates with Leviton’s popular line of
Decora wiring devices.
• 180° field-of-view provides approximately 2100 SF of
coverage.
• Convenient pushbutton provides manual-ON/OFF
light switching at any time.
• Two dual element PIR sensors used to widen detec-
tion range.
• Segmented Fresnel lens provides optimum sensitivity
and performance. Designed with an extensive “minor
motion” area where even slight body movements will
be detected.
• Vandal resistant PIR lens.
• Patented blinders - horizontal field-of-view may be
adjusted between 180° and 60° of arc by using inte-
gral blinders located on either side of the lens. No
masking tape required.
• Manual-ON/auto-OFF mode for installations where
manual-ON switching is required but auto-OFF
switching is still desired for CEC Title 24 energy
savings.