Specification

product data
oSWLr-I0W
Passive Infrared Aisle (Long Range)
Occupancy Sensor
BASIC OPERATION
Specifically designed for long, relatively narrow spaces
such as hallways and corridors, the OSWLR-I Occupancy
Sensor provides long range and high sen si tiv i ty.
The OSWLR-I Occupancy Sensor utilizes a “long range”
lens. This lens provides coverage up to 100 ft. when
mounted 10 ft. above the floor. Can be mount ed lower
if needed.
The mount ing base, pro vid ed with the sensor, allows
quick and easy mount ing in cor ners, on walls or on ceil-
ings. The most common applications are factory stor-
age areas, warehouse aisles and corridors.
APPLICATIONS
• Cafeterias • Hallways • Loading docks
• Open offices • Parking garages • Storage rooms
• Warehouses • Workspaces • Vending rooms
FEATURES
• Fast, Sim ple In stal la tion: Easy base mount, three wire
connection (low voltage) and twist-and-lock detector
attachment.
• Self-Adjusting: Internal microprocessor con tin u al ly
analyzes, evaluates and adjusts the infrared sen si tiv i-
ty and time delay. Per for mance is kept at a max i mum
and user com plaints are eliminated.
• Multi-element, long range lens
• Flexible Base Mounting: Supplied twist-and-lock base
mount permits fast alignment. Supplied cover hides
mounting hardware and wires. Can be used with
raceways for hard surface installations. Adjustable
canopy for wall or ceiling mount.
• Range & Coverage: Up to 100 ft. for gross body
motion or forklift. Max. 33.2 feet wide.
• Custom off-white color matched for shaded ceiling/
corner spaces and most common ceiling tiles.
• High Motion Sensitivity: The large lens area and
multi-element lens design give excellent range and
sensitivity.
• Ambient Light Recognition: A Light Sensor prevents
lights from turning on when the room is adequately
lit by natural light.
• Non-Volatile Memory: Learned and ad just ed set-
tings saved in protected memory are not lost during
power outages.
• Timer Setting Feature: Automatic – 30sec – 30min.
Test mode – 6sec with auto exit programming.
• Walk-Through: Provides increased energy savings by
decreasing the time delay to 2.5min when someone
momentarily walks through the monitored space.
• Uses OSPxx Series Power Pack: Uses Class 2, 24 volt
wiring, three wire connection (low voltage). Multiple
sensors can control single or multiple power packs.
• Power base (OPB 15) available for line voltage appli-
cations
• Device: High-impact housing and in jec tion molded
plastic. Color coded wire leads are 6” long (16.24 cm).
• Infrared Sensing: High sensitivity 9.8 micron detector
dual element.
Timer Left In Test Mode - The
sensor remains in an 6 sec.
test mode.
False-On - The sensor
incorrectly turns the lights on.
False-O - The sensor
incorrectly turns the lights o.
An installer accidentally leaves
the sensor in the 6 sec. timer
test mode and the lights may go
o or on every 6 sec.
The sensor detects movement
in the corridor or hall way and
the room lights turn on.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn o.
The sensor automatically resets the timer
to 10 min . after 15 min of test mode.
After an initial movement is sensed,
if another mov ement is not sensed within
the timer setting then the delayed o time
setting is automatically reduced.
Condition Example Self-Adaptive Reaction
If motion is sensed within a short period after
the lights go o, then the current delayed
o-time setting is increased.
HOW THE OSWLR-I AUTOMATICALLY ADAPTS
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: [phone] www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.