Instructions / Assembly

After installation, turn the lamp in the ON position (the light will remain OFF). To adjust lighting level, proceed as follows:
ON: Raise the slider to the brightness level desired (refer to Figure 2).
OFF: Lower the slider to the OFF position (refer to Figure 2). The light will turn OFF.
NOTE: LED and CFL lamps generally have a higher turn-on voltage requiring the slider to be raised slightly higher until the bulb turns ON.
DIM/BRIGHT: Raise or lower the slider to the desired level.
OPERATION
Plug-In Lamp Dimmer
Rated: 300W Incandescent, 150W LED & CFL, 120VAC
Cat. No. TBL03
WARNINGS AND CAUTIONS:
s 4OBEINSTALLEDANDORUSEDINACCORDANCEWITHAPPROPRIATEELECTRICALCODESANDREGULATIONS
s 4OAVOIDOVERHEATINGANDPOSSIBLEDAMAGETOOTHEREQUIPMENTDONOTUSETOCONTROLMOTOROPERATEDORTRANSFORMERSUPPLIEDAPPLIANCESWITHTHE
exception of compatible dimmable LED and CFL bulbs.
s DO NOT use with 3-way bulbs. Use with compatible dimmable CFL and dimmable LED bulbs. Please refer to www.leviton.com for a complete list of
compatible bulbs.
FEATURES
s $ESIGNEDFORCONVENIENCERELIABILITYANDDURABILITY
s
%ASYTOUSESLIDECONTROL
s .OWIRINGNECESSARY
s FOOTCORDFORHARDTOGETTORECEPTACLES
s 3MOOTHDIMMINGOF)NCANDESCENTDIMMABLE,%$AND#&,BULBS
ENGLISH
INSTALLATION
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and
proper use for five years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option, if within such five year period the product is returned prepaid, with proof
of purchase date, and a description of the problem to Leviton Manufacturing Co., Inc., Att: Quality Assurance Department, 201 North Service Road, Melville, New York 11747. This warranty excludes
and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened,
abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including
merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for
a particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment,
lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise..
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
INSTALLING YOUR DIMMER
1. Plug lamp into dimmer:
Turn off lamp. Plug a lamp into the Plug-in Lamp Dimmer (refer to Figure 1).
2. Plug dimmer into outlet: Ensure that the Plug-in Lamp Dimmer is in the OFF position (refer to Figure 1). Plug the dimmer into a polarized receptacle.
NOTE: This device is a POLARIZED cord set. It has a polarized plug (one blade wider than the other) and a polarized outlet (one slot is longer than
the other). The polarized plug is not intended to be mated with non-polarized outlets (having both slots the same size). A polarized outlet is intended to
mate with a polarized plug in only one way (the longer slot with the wider blade).
Figure 2
Slider
Slider OFF
Deslizador
Glissière
Slider ON
(full bright)
Deslisador
ENCENDIDO
(brillantez total)
Position
sous tension
(pleine intensité)
Position hors tension
Deslisador APAGADO
Figure 1
Dimmer
Gradateur
Atenuador
DI-000-TBL03-22A
© 2012 Leviton Mfg. Co., Inc.
FOR CANADA ONLY
&ORWARRANTYINFORMATIONANDORPRODUCTRETURNSRESIDENTSOF#ANADASHOULDCONTACT,EVITONINWRITINGATLeviton Manufacturing of Canada Ltd to the attention of the Quality Assurance Department, 165
Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
WEB VERSION